Remote Rig
RRC 1258 Support in English => Configuration, RRC 1258 => Topic started by: VE9HF on 2014-12-16, 22:55:37
-
I have two new RRC-1258 MkII boxes from HRO. Both are powered up and both are connected by ethernet cables to my router. I changed the IP addresses to 227 and 228 as per the manual, but both said they were "NOT REACHABLE" after they rebooted. I then noticed that the numbers for Gateway and DNS had "2" instead of "1" for the third number. I went back and changed the third number in IP address from "1" to "2" for both and that seemed to fix it. However, when I click on BROWSE I get the message "Unhandled exception has occurred in your application" and I can't get any further. Any assistance would be greatly appreciated. Rick VE9HF
-
Let's make this easy......drop me a short mail at dj0qn (at) darc.de and I will send you my networking checklist that walks you through the installation.
73,
Mitch DJ0QN / K7DX