Remote Rig

RRC 1258 Support in English => Hardware, Cabling, Installations => Topic started by: ik2hkt on 2015-04-01, 16:54:21

Title: Receiving while transmit with TS2000 / RC2000
Post by: ik2hkt on 2015-04-01, 16:54:21

Hello !

I have a TS2000 and I use it in remote with  RC2000 controller.

I setup everythink as per instruction manual under RRC1258 MKii and all it's ok with remoterig system
( and also with RRC Nano software ).

But I am not able to receive the sub-receiver while
I trasmit with the main vfo inspite of the "busy" appeare in the lcd sub vfo when squelch is open.

Maybe some setting to do for receive while transmit ?

or

Maybe it's necessary stereo headphone with different channel for each vfo ?

I have search in the previous message of the forum but nothing.

Any suggestions will be appreciated.

73's - Stefano IK2HKT

Title: Re: Receiving while transmit with TS2000 / RC2000
Post by: ik2hkt on 2015-04-01, 19:34:38

Quote from: ik2hkt on 2015-04-01, 16:54:21

Hello !

I have a TS2000 and I use it in remote with  RC2000 controller.

I setup everythink as per instruction manual under RRC1258 MKii and all it's ok with remoterig system
( and also with RRC Nano software ).

But I am not able to receive the sub-receiver while
I trasmit with the main vfo inspite of the "busy" appeare in the lcd sub vfo when squelch is open.

Maybe some setting to do for receive while transmit ?

or

Maybe it's necessary stereo headphone with different channel for each vfo ?

I have search in the previous message of the forum but nothing.

Any suggestions will be appreciated.

73's - Stefano IK2HKT

Problem solved ! ....  put  fullduplex = YES + RTP tx mode = CONTINUOUS in RRC Control panel
and RTP tx mode =  CONTINUOUS in RRC Radio

73's - Stefano IK2HKT