Remote Rig

RRC 1258 Support in English => Configuration, RRC 1258 => Topic started by: K1IKE-Joe on 2015-09-07, 16:27:44

Title: Switching RRC-Control box between Kenwood and Icom radios
Post by: K1IKE-Joe on 2015-09-07, 16:27:44

Hello to All,

I have two remote stations that I would like to access from the same RRC-Control unit, a TS-480SAT and an Icom IC-706MKIIG.  My plan was to set up two profiles and switch between them when I want to change radios.  What I am finding is that I could probably avoid changing jumpers by wiring the AUX/MIC microphone cable differently for the Kenwood TS-480.  My problem is the JMP1 (DC to Mic) and JMP2 (8/9V) jumpers.  It looks like I would have to open the RRC-Control and move these jumpers in order to change from Kenwood to Icom IC-706 configuration.

Is there anyone out there using the RRC-Control box for different brand radios?  If so, have you figured out a way to easily switch between brand radios.

Thanks, Joe, K1ike