Remote Rig

RRC 1258 Support in English => Configuration, RRC 1258 => Topic started by: ur5mid on 2015-12-15, 09:42:59

Title: K3 problem
Post by: ur5mid on 2015-12-15, 09:42:59

I'm used K3/0 mini. Everything works fine. But I decided to try to use the remote control without the panel. Such problem: In the HamRadiDelux if I choose COM2 (on my PC COM4), then turn on the radio, I hear sound, but turns off after a few seconds.The program reports, do not read the data frequency. If I connect to COM1 (on my PC COM3), nothing happens at all. COM1 mode 7. What is the problem?
Serge UR5MID

Title: Re: K3 problem
Post by: sm2o on 2015-12-15, 11:27:57

HI

If you not use the panel you must set the RRCs in program mode = 4 and set com0 baudrates correct, set com2 in parallell with com0 etc
You also has to manually connect on the statuspage. See page 213 in the manual.

73 de mike

Title: Re: K3 problem
Post by: ur5mid on 2015-12-16, 13:37:31

SM2O, thanks for help. I set in RRC-control mode 4 and i set auto connect. It`s ok. In RRC-radio stay mode k3 twin . I set virtual splitter (VSPE) for COM1 (RRC) and now i use together Win4K3suit and any logger.
Serge UR5MID