Remote Rig

RRC 1258 Support in English => General discussion forum => Topic started by: OE3NKA on 2010-11-09, 07:31:05

Title: No PTT using IC 2820 on fixed IP's
Post by: OE3NKA on 2010-11-09, 07:31:05

after installing the equipment audio and controlling is running perfect now. But pushing the PTT,  sound on controller side mutes, but there is no transmission activated. What could be wrong?

I'm using fixed IP adresses on both sides, ports are free and due to an other sip installation I changed the sip port on both sides to 5061

vy 73, Norbert

Title: Re: No PTT using IC 2820 on fixed IP's
Post by: sm2o on 2010-11-10, 10:17:27

Hi

Have you checked the red jumpers on the Radio-RRC. Maybe the PTT wire is broken, check with an ohm meter, it can be difficult to see

73 de mike

Title: Re: No PTT using IC 2820 on fixed IP's
Post by: OE3NKA on 2010-11-14, 21:28:15

Problem is solved, exactly by the recomended action. After changing of jumpers everything is working well under the special license of OE3NKA_REMOTE. Your can find further information about this public Internet Remote Base Station at www.qth.at/oe3nka_remote  - now with an IC2820, powered by RRC-1258MkIIs

Mny thanks Mike for your prompt support!

vy73 de Norbert