Remote Rig
RRC 1258 Support in English => General discussion forum => Topic started by: Mitch on 2023-12-10, 18:54:02
-
Can anyone tell me if it's possible to install a second RRC Box at radio side if so how did they do it.
-
Hi
Just setup unique portnumbers for each RRC pair. And setup corresponding portforwardilngs for each port in the radio QTH router
73 de mike
-
Thanks mike,
so just change RRC Box 2 and router like this
UDP cmd port: 13006
UDP audio port: 13005
SIP port: 13004
Web server port: Different to box 1
73 Gary
-
Yes, and setup the same ports in the second Control-RRC
Mike
-
:) Thanks Mike
-
Tried out changing setting in second box and did not work for me.
Looks like will need to keep only one pair working :(
Thanks all
-
It works if it's done correct. I have 4 sets my self in use
/Mike
-
Mike will give it a try again tomorrow with the backup .config handy.
Working with PC, routers and port forwarding is not my thing :-(
Cheers Gary
-
Mitch- a tip.. Disconnect the first box (which you know already works) and then connect the second box. Each box must have their own IP address.
will also need different ports. Once the second box is working, then reconnect the first box. I have also a remote SO2r Box setup at the remote station. Dennis W1UE
-
Thank you Mike and also Dennis. I have followed this and second box still will not work and will just have to use second radio box as spare and second control box for car.
Many thanks for kind help at Remoterig.com
-
After working on both RRC boxes with no joy for some time. I would like to thank kindly Mike for solving the problem.
Now will be glad to work the both radios remote from my home and also mobile. Again Mike thank you.
73s Gary