Remote Rig

RRC 1258 Support in English => General discussion forum => Topic started by: cx6vm on 2024-02-29, 22:11:45

Title: RRC1258, K3/0 mini no RF output on any mode
Post by: cx6vm on 2024-02-29, 22:11:45

Hello

today i noticed that my K3/0 mini is not transmitting on any mode, SSB, CW, FT8

Radio go on TX, but no RF output

I can receive without problem on SSB, CW and also FT8, but incredible that I cannot transmmit

Any idea what to check?, MIC gain is OK, POWER is OK

thanks
Jorge
CX6VM/CW5W

Title: Re: RRC1258, K3/0 mini no RF output on any mode
Post by: sm2o on 2024-03-02, 08:22:27

Hi

If SSB and FT8 gives no output it can be cauesed by by codec settings. But If also CW gives no output it's more likely a Radio problem, not a Remoterig problem

73 de mike

Title: Re: RRC1258, K3/0 mini no RF output on any mode
Post by: cx6vm on 2024-03-08, 02:19:34

thanks Mike

tomorrow will go to the remote site and check what happen

73,
Jorge

Title: Re: RRC1258, K3/0 mini no RF output on any mode
Post by: pe1hzg on 2024-03-21, 21:58:24

Would be interested (in the forum) to see your finding from the site visit. One possibility: if there is RF with the TUNE button, then perhaps MENU:MIC SEL is set incorrectly. Don't ask how I suggest this ;-)