Remote Rig
RRC 1258 Support in English => Configuration of Routers, Firewalls, etc => Topic started by: cx6vm on 2025-01-15, 16:36:52
-
Hello
for many years I have a pair of RRC 1258 boxes workng with a K3/100 on the radio site and a K3/ mini on the control side, all working perfectly
The internet on the radio site, is from a link with Ubiquiti antennas from my home, so I am in the same network
NOW I change the ubiquiti link with a Starlink antenna, PERSONAL PLAN, at the radio site.
What type of routers or other hardware I need to have the remote working with the Starlink PERSONAL PLAN at the radio site and the local internet at home?
I have no idea of networks or VPN. But the locals guys that do these work donīt have idea of amateur radio, so what I need to tell him so he can figure out what hardware I need to buy or what he need to setup?
thanks in advance!!
73,
Jorge
CX6VM/CW5W
-
Starlink use CGN so it cannot be used at the Radio-site without using VPN. I have seen people overcome CGN with special routers using Zerotier VPN, but it's notning that I have tested. I would have stayed with the UBNT links
73 de mike
-
hello Mike
Ubiquiti link is very hard to maintain (6 antennas).
Do you know if Starlink Business plan will work?
thanks
Jorge
-
Yes SL business plans has public IP as far as I have heard
73 de Mike
-
Hello Guys
I finally got the solution from other guy that know about networking, Staarlink, etc.
I just need to change Starlink Plan to have a public IPv4 politic
thanks!
Jorge
-
Yes that was what I said also, but here the hardware for business plan is expensive $2500 + $80/month
73 de mike