Remote Rig

Webswitch 1216H Support in English => Configuration, Webswitch 1216H => Topic started by: K0LO on 2025-04-10, 17:35:03

Title: Webswitch 1216H Corrupted Profile
Post by: K0LO on 2025-04-10, 17:35:03

Is there any way to completely remove a corrupted profile from a WebSwitch 1216H? If you look at my attachment "Webswitch-1216H-settings.txt" you can see a list of Relays that goes in this sequence: Relay 1,2,3,4,5,6,6,7,8,9,10. There should only be relays 1 - 5. If you view my other attachment "Corrupted Profile.png" you can see another example of the corruption.

The other profiles work correctly, but I don't want remote users to accidentally select this profile. I've tried connecting via USB and using the Microbit Setup Manager but I can't seem to delete this rogue profile. Any help would be appreciated.

Thanks,
Mark
K0LO

Title: Re: Webswitch 1216H Corrupted Profile
Post by: K0LO on 2025-04-12, 16:12:30

I found a way to remove the corrupted profile. I could not find a way to delete the corrupted profile, but I found an alternative. Using Microbit Setup Manager, connect to the switch using USB. Then copy a known good profile over the bad profile. This worked. Afterwards, edit the copied profile.