Messages

1

Configuration, RRC 1258 / Windows 10 and DXlab

« on: 2016-02-08, 11:52:18 »

Hello all,

I'm having troubles with Commander (DXlab) under windows 10 (64bit). I fount the following error in log file

08-feb-2016 10:43:49 > program error 8020 in module CIVComm.ReadPortBinary: Error reading comm device

The same configuration worked under Windows 7. I did some googling and found out this Microsoft article. https://support.microsoft.com/en-us/kb/318784 . Is this really problem with Windows driver or is something else. N1MM+ look that work fine.

Equipment on my side is TS-480HX and RRC 1258 (HW version is 6) current version of Firmware 2.89. OS is Windows 10 professional. User on a PC is not administrator. Software I'm trying to use is DXLab - Commander ver 12.0.8 (the latest).

I have also tried a new Beta firmware but no changes??

Thanks and 73's

de Jure - S57KW

2

Configuration, RRC 1258 / Re: Remoterig FREE Dynamic DNS service

« on: 2012-06-14, 17:01:36 »

Thanks a lot!

73's  Jure - S57KW

3

Configuration, RRC 1258 / Re: Remoterig FREE Dynamic DNS service

« on: 2012-06-14, 05:42:02 »

Hello all,

I have strange problem with Dyn DNS service. It looks like on one of the server old IP address has stale. Sometimes i receive correct ip address and other time the wrong (old) one. Below is my current status page

Name   Value
Radio   ON
Connection status   Disconnected
SIP status   Idle
Last SIP error   None
RTP/UDP audio status   Disconnected
UDP cmd status   Disconnected
SIP command timeout   0
Rx Jitter buffer size   4
Rx Jitter delay   3
Dual Rx   0
External IP   XXX.YYY.124.125
SIP Out port   5065
SIP In port   5065
Audio Out port   0
Audio In port   0
Command Out port   0
Command In port   12000
External SIP In port   5065
External Audio In port   11000
External Cmd In port   12000
Other party   0.0.0.0
Input 1   High
Input 2   High
Output 0   High
Output 1   Low
Output 2   Low
Dynamic DNS status   Error, code 19
Ping status (watchdog)   OK [48 ms]
DNS status   OK, remoterig.com = 193.202.110.185
Active profile:   Default
PTT status:   OFF


As you can see Dynamic DNS status is Error, code 19

Thanks for your help and 73's