Hi Mike,
I removed the speaker from the radio to the Radio-RRC, the sidetone is coming from the Control-RRC. I can not hear the side ton on the radio part speaker. when I push the key on Control-RRC part.
I am sending you the "exported settings html" files in attachment from both units and I am waiting your opinion.
Also I send you the accessibility to my radio unit:
Radio RCC from Internet (outside)
http://92.85.192.133:81/ The Radi-RRC alwais is online, maybe you vould like to tryto access the unit.
Accessing the Radio RCC from LAN (Local Area Network)http://192.168.1.8
Control side:
Info
Name Value
Company Microbit
Product 1258
PID 4
Version 7
HW 8
Software 2.63
Bootloader 1.10
Compiler 4.6.2
Build Sep 25 2012 09:25:45
ROM/RAM 435832/56456
ETH-RAM 2944 (max 3kB!)
ResetSrc 0 [3]
Uptime 375
Serial number 5763
MAC address 00:1e:fd:01:8d:23
IP address 192.168.1.101
Netmask 255.255.255.0
Gateway 192.168.1.1
DNS 192.168.1.1
Wi-Fi network module not present
Settings
Unit ID (Banner) RCC-Control
DHCP 1
IP 192.168.0.227
Netmask 255.255.255.0
Gateway 192.168.0.1
Dns server 192.168.0.1
Extern IP/Host
Eth-type 5
Web page user zsolt
Web page pwd sezam
Program mode 15
Control panel 1
Sip password teszt
Sip contact 92.85.192.133
Auto connect 0
Audio quality 2
Audio dual-rx 0
Codec out gain 255
Codec inp gain 18
Codec inp HPF Hz 3
Codec inp preamp 1
COM0 baudrate 64000
COM0 data bits 8
COM0 stop bits 1
COM0 parity 0
COM0 Program mode 3 char timeout 2
Use USB Com Port as COM0 0
COM1 mode 0
COM1 baudrate 9600
COM1 data bits 8
COM1 stop bits 1
COM1 parity 0
COM1 rts/cts 0
COM1 terminator (hex) 00
Use USB Com Port as COM1 0
COM2 mode 0
COM2 baudrate 9600
COM2 data bits 8
COM2 stop bits 1
COM2 parity 0
COM2 terminator (hex) 00
Use USB Com Port as COM2 0
UDP cmd port 12000
UDP audio port 11000
SIP port 5060
Web server port 80
Telnet server port 23
Rx jitter buffer size 4
Rx jitter delay 3
Audio packet size (ms) 20
RTP tx mode 0
Debug level 0
Disable audio tones 0
Full duplex 0
PTT-off mute delay 0
IP Type-of-Service (dec) 0
Yaesu power-on/off 0
Elecraft advanced 0
Dynamic DNS check interval 0
Dynamic DNS host name 0
Own host name
Username
Password
Enable 1
Speed wpm [0/10-40] 0
Iambic 0
Paddle reverse 0
Weight [25-40] 22
Side tone hz [0,300-1500] 700
Side tone -db [50-0] 20
Lf delay ms [0-500] 0
Key delay ms [0-250] 0
PTT activated by Keyer 0
PTT tail delay ms [0-999] 0
Speed pot min wpm [5-99] 18
Speed pot max wpm [5-99] 40
IN0 mode 0
OUT0 mode 0
OUT0 mode 0
OUT1 mode 0
OUT1 mode 0
OUT2 mode 0
OUT2 mode 0
USB RTS as PTT 0
USB DTR as CW 0
Enable ping watchdog 0
IP address to ping
Ping interval (seconds) 300
Startup delay (seconds) 300
Failure count to reboot 3
1: Name (SSID)
1: Password (PSK)
2: Name (SSID)
2: Password (PSK)
3: Name (SSID)
3: Password (PSK)
4: Name (SSID)
4: Password (PSK)
5: Name (SSID)
5: Password (PSK)
6: Name (SSID)
6: Password (PSK)
7: Name (SSID)
7: Password (PSK)
8: Name (SSID)
8: Password (PSK)
Status
Name Value
Control panel OFF
Radio OFF
Connection status Disconnected
SIP status Idle
Last SIP error None
RTP/UDP audio status Disconnected
UDP cmd status Disconnected
SIP command timeout 0
Rx Jitter buffer size 4
Rx Jitter delay 3
Dual Rx 0
SIP Out port 5060
SIP In port 5060
Audio Out port 11000
Audio In port 11000
Command Out port 12000
Command In port 12000
External SIP In port 5060
External Audio In port 11000
External Cmd In port 12000
Other party 92.85.192.133
Input 0 High
Input 1 High
Input 2 High
Output 0 Low
Output 1 Low
Output 2 Low
DNS status OK, remoterig.com = 193.202.110.185
Active profile: Default
PTT status: OFF
Radio side:Info
Name Value
Company Microbit
Product 1258
PID 4
Version 7
HW 8
Software 2.63
Bootloader 1.10
Compiler 4.6.2
Build Sep 25 2012 09:25:45
ROM/RAM 435832/56456
ETH-RAM 2944 (max 3kB!)
ResetSrc 0 [3]
Uptime 160875
Serial number 5873
MAC address 00:1e:fd:01:8d:91
IP address 192.168.1.8
Netmask 255.255.255.0
Gateway 192.168.1.1
DNS 192.168.1.1
Wi-Fi network module not present
Settings
Unit ID (Banner) RCC-Radio
DHCP 0
IP 192.168.1.8
Netmask 255.255.255.0
Gateway 192.168.1.1
Dns server 192.168.1.1
Extern IP/Host
Eth-type 5
Web page user zsolt
Web page pwd sezam
Program mode 15
Control panel 0
Sip password teszt
Sip contact
Auto connect 0
Audio quality 2
Audio dual-rx 0
Codec out gain 255
Codec inp gain 0
Codec inp HPF Hz 3
Codec inp preamp 1
COM0 baudrate 64000
COM0 data bits 8
COM0 stop bits 1
COM0 parity 0
COM0 Program mode 3 char timeout 2
Use USB Com Port as COM0 0
COM1 mode 0
COM1 baudrate 9600
COM1 data bits 8
COM1 stop bits 1
COM1 parity 0
COM1 rts/cts 0
COM1 terminator (hex) 00
Use USB Com Port as COM1 0
COM2 mode 0
COM2 baudrate 9600
COM2 data bits 8
COM2 stop bits 1
COM2 parity 0
COM2 terminator (hex) 00
Use USB Com Port as COM2 0
UDP cmd port 12000
UDP audio port 11000
SIP port 5060
Web server port 80
Telnet server port 23
Rx jitter buffer size 4
Rx jitter delay 3
Audio packet size (ms) 20
RTP tx mode 0
Debug level 0
Disable audio tones 0
Full duplex 0
PTT-off mute delay 0
IP Type-of-Service (dec) 0
Yaesu power-on/off 0
Elecraft advanced 0
Dynamic DNS check interval 0
Dynamic DNS host name 0
Own host name
Username
Password
Enable 0
Speed wpm [0/10-40] 0
Iambic 1
Paddle reverse 0
Weight [25-40] 30
Side tone hz [0,300-1500] 800
Side tone -db [50-0] 20
Lf delay ms [0-500] 0
Key delay ms [0-250] 0
PTT activated by Keyer 1
PTT tail delay ms [0-999] 2
Speed pot min wpm [5-99] 10
Speed pot max wpm [5-99] 40
IN0 mode 0
OUT0 mode 0
OUT0 mode 0
OUT1 mode 0
OUT1 mode 0
OUT2 mode 0
OUT2 mode 0
USB RTS as PTT 0
USB DTR as CW 0
Enable ping watchdog 0
IP address to ping 192.168.0.227
Ping interval (seconds) 300
Startup delay (seconds) 300
Failure count to reboot 3
1: Name (SSID)
1: Password (PSK)
2: Name (SSID)
2: Password (PSK)
3: Name (SSID)
3: Password (PSK)
4: Name (SSID)
4: Password (PSK)
5: Name (SSID)
5: Password (PSK)
6: Name (SSID)
6: Password (PSK)
7: Name (SSID)
7: Password (PSK)
8: Name (SSID)
8: Password (PSK)
Status
Name Value
Radio OFF
Connection status Disconnected
SIP status Idle
Last SIP error None
RTP/UDP audio status Disconnected
UDP cmd status Disconnected
SIP command timeout 0
Rx Jitter buffer size 4
Rx Jitter delay 3
Dual Rx 0
SIP Out port 29512
SIP In port 5060
Audio Out port 60020
Audio In port 11000
Command Out port 28268
Command In port 12000
External SIP In port 5060
External Audio In port 11000
External Cmd In port 12000
Other party 109.166.137.194
Input 1 High
Input 2 High
Output 0 Low
Output 1 Low
Output 2 Low
Dynamic DNS status Unknown
Ping status (watchdog) Off
DNS status OK, remoterig.com = 193.202.110.185
Active profile: Default
PTT status: OFF
Soryy but the html extension it is not accepted from the attachement.
73
de zsolt/yo6zs
Show Posts
