Show Posts
1
Configuration of Routers, Firewalls, etc / TS-480 DDNS issues
« on: 2013-01-12, 04:16:03 »
Hello all,
New to Remote Rig. In short , everything works great on my home router (Netgear WNDR3700). I am now trying to set up the DDNS so I can go remote. I have tried to test using the STATUS page but I get "failed to connect to mySQL. Help. Here are the settings in my Radio RRC 1258MKII.
What , how and why am I doing this wrong. QRZ !! MIKE HELP
Info
Name Value
Company Microbit
Product 1258
PID 4
Version 7
HW 8
Software 2.63
Bootloader 1.10
Compiler 4.6.2
Build Sep 25 2012 09:25:45
ROM/RAM 435832/56456
ETH-RAM 2944 (max 3kB!)
ResetSrc 0 [3]
Uptime 1943
Serial number 5827
MAC address 00:1e:fd:01:8d:63
IP address 192.168.1.20
Netmask 255.255.255.0
Gateway 192.168.1.1
DNS 192.168.1.1
Wi-Fi network module not present
Status
Name Value
Radio ON
Connection status OK
SIP status Connected/transfering
Last SIP error None
RTP status Excellent(60)
UDP cmd status OK(45)
SIP command timeout 0
Rx Jitter buffer size 4
Rx Jitter delay 3
Dual Rx 0
Current audio packet size 20
Current audio quality 2 - Linear 16 bits 8 kHz
External IP 184.63.184.20
SIP Out port 5060
SIP In port 5060
Audio Out port 11000
Audio In port 11000
Command Out port 12000
Command In port 12000
External SIP In port 5060
External Audio In port 11000
External Cmd In port 12000
Other party 192.168.1.30
Input 1 High
Input 2 High
Output 0 Low
Output 1 Low
Output 2 Low
Dynamic DNS status Error, code 19
Ping status (watchdog) Off
DNS status OK, remoterig.com = 193.202.110.185
Active profile: Default
PTT status: OFF
IP settings
Unit ID (Banner)
DHCP No Yes
IP
Netmask
Gateway
Dns server
Extern IP/Host
Eth-type Auto Auto, prefer 10 Mbit 10HDX 10FDX 100HDX 100FDX
Web page user
Web page pwd
Radio settings
Program mode TS480/TM-D710 Sip password
Audio quality 0 - alaw 8 kHz 1 - Linear 12 bits 8 kHz 2 - Linear 16 bits 8 kHz 3 - alaw 12 kHz 4 - Linear 12 bits 12 kHz 5 - Linear 16 bits 12 kHz 6 - alaw 16 kHz 7 - Linear 12 bits 16 kHz 8 - Linear 16 bits 16 kHz 9 - alaw 24 kHz 10 - Linear 12 bits 24 kHz 11 - Linear 16 bits 24 kHz 12 - IMA ADPCM 4 bits 8 kHz 13 - IMA ADPCM 4 bits 16 kHz
Audio dual-rx No Yes
Codec out gain
Codec inp gain
Codec inp HPF Hz 82 102 131 163 204 261 327 408
COM0 baudrate 600 1200 2400 4800 9600 19200 38400 57600 64000
COM0 data bits 5 6 7 8
COM0 stop bits 1 2
COM0 parity 0 - Off 1 - Odd 2 - Even 3 - Forced "1" 4 - Forced "0"
COM0 Program mode 3 char timeout
Advanced settings
UDP cmd port 12000
UDP audio port 11000
SIP port 5060
Web server port 80
Telnet server port 23
Rx jitter buffer size 4
Rx jitter delay 3
Audio packet size (ms) 20
RTP tx mode Normal
Debug level Off
IP Type-of-Service (dec)
Yaesu power-on/off No
Dynamic DNS settings
Dynamic DNS check interval 10
Dynamic DNS host name members.dyndns.org ddns.remoterig.com
Own host name r3hktd5g. XXXXXXXXXXXXX
Username rrc1258-5827
Please any help .... I want to run this while on holliday Coming up in 2weeks AHHHHHHRRRR HHHHH
New to Remote Rig. In short , everything works great on my home router (Netgear WNDR3700). I am now trying to set up the DDNS so I can go remote. I have tried to test using the STATUS page but I get "failed to connect to mySQL. Help. Here are the settings in my Radio RRC 1258MKII.
What , how and why am I doing this wrong. QRZ !! MIKE HELP
Info
Name Value
Company Microbit
Product 1258
PID 4
Version 7
HW 8
Software 2.63
Bootloader 1.10
Compiler 4.6.2
Build Sep 25 2012 09:25:45
ROM/RAM 435832/56456
ETH-RAM 2944 (max 3kB!)
ResetSrc 0 [3]
Uptime 1943
Serial number 5827
MAC address 00:1e:fd:01:8d:63
IP address 192.168.1.20
Netmask 255.255.255.0
Gateway 192.168.1.1
DNS 192.168.1.1
Wi-Fi network module not present
Status
Name Value
Radio ON
Connection status OK
SIP status Connected/transfering
Last SIP error None
RTP status Excellent(60)
UDP cmd status OK(45)
SIP command timeout 0
Rx Jitter buffer size 4
Rx Jitter delay 3
Dual Rx 0
Current audio packet size 20
Current audio quality 2 - Linear 16 bits 8 kHz
External IP 184.63.184.20
SIP Out port 5060
SIP In port 5060
Audio Out port 11000
Audio In port 11000
Command Out port 12000
Command In port 12000
External SIP In port 5060
External Audio In port 11000
External Cmd In port 12000
Other party 192.168.1.30
Input 1 High
Input 2 High
Output 0 Low
Output 1 Low
Output 2 Low
Dynamic DNS status Error, code 19
Ping status (watchdog) Off
DNS status OK, remoterig.com = 193.202.110.185
Active profile: Default
PTT status: OFF
IP settings
Unit ID (Banner)
DHCP No Yes
IP
Netmask
Gateway
Dns server
Extern IP/Host
Eth-type Auto Auto, prefer 10 Mbit 10HDX 10FDX 100HDX 100FDX
Web page user
Web page pwd
Radio settings
Program mode TS480/TM-D710 Sip password
Audio quality 0 - alaw 8 kHz 1 - Linear 12 bits 8 kHz 2 - Linear 16 bits 8 kHz 3 - alaw 12 kHz 4 - Linear 12 bits 12 kHz 5 - Linear 16 bits 12 kHz 6 - alaw 16 kHz 7 - Linear 12 bits 16 kHz 8 - Linear 16 bits 16 kHz 9 - alaw 24 kHz 10 - Linear 12 bits 24 kHz 11 - Linear 16 bits 24 kHz 12 - IMA ADPCM 4 bits 8 kHz 13 - IMA ADPCM 4 bits 16 kHz
Audio dual-rx No Yes
Codec out gain
Codec inp gain
Codec inp HPF Hz 82 102 131 163 204 261 327 408
COM0 baudrate 600 1200 2400 4800 9600 19200 38400 57600 64000
COM0 data bits 5 6 7 8
COM0 stop bits 1 2
COM0 parity 0 - Off 1 - Odd 2 - Even 3 - Forced "1" 4 - Forced "0"
COM0 Program mode 3 char timeout
Advanced settings
UDP cmd port 12000
UDP audio port 11000
SIP port 5060
Web server port 80
Telnet server port 23
Rx jitter buffer size 4
Rx jitter delay 3
Audio packet size (ms) 20
RTP tx mode Normal
Debug level Off
IP Type-of-Service (dec)
Yaesu power-on/off No
Dynamic DNS settings
Dynamic DNS check interval 10
Dynamic DNS host name members.dyndns.org ddns.remoterig.com
Own host name r3hktd5g. XXXXXXXXXXXXX
Username rrc1258-5827
Please any help .... I want to run this while on holliday Coming up in 2weeks AHHHHHHRRRR HHHHH