Messages

1

Configuration, RRC 1258 / Re: TS480 - Power button gives TONE and no display

« on: 2013-04-06, 00:34:53 »

found the problem..
the Radio RRC appeared to be a CONTROL-RRC after the upgrade to 2.68. Followed the procedure to recover the Radio-RRC personality and it came right up into the proper state. SIP Connection was immediate.

Also tested successfully with RRC-Micro and now have the entire configuration working thru the Firewall using Control from an LTE/Cell connection.

Both Control Panel and Micro operation - very cool..!!

2

Configuration, RRC 1258 / TS480 - Power button gives TONE and no display

« on: 2013-04-05, 02:07:38 »

using standard 192.168.0.227 for Control and 228 for Radio
jumper configuration #2 (Old model 480)
modular mic into Control RRC
long RJ-11 on both Control and Radio RRC (don't have the short cables)
checked pin-outs on both cables - both are straight-thru
and both work, if connecting radio to control head direct (bypass RRC)

can get to both Webservers at 227 and 228 without issue
Power button doesn't turn-on display and no SIP connect indication..
have checked the DIP strapping on both units, along with DVM for continuity - OK

any ideas..?
Mike - WB6RTH