Messages

1

Configuration, RRC 1258 / Re: Problem with Setup FT817 with HRD

« on: 2014-07-12, 13:02:22 »

Thanks Mike

The settings files are ttached to first post.

2

Configuration, RRC 1258 / Re: Problem with Setup FT817 with HRD

« on: 2014-07-10, 23:44:48 »

Hi Mike
Not sri 
Radio side is connected with : TTL to 8pin MiniDin as per manual.  Triple checked continuity.

aux/Mic>FT817 Mic
Strapping as per manual for 8x7

control side Laptop USB>RRC USB

73 de Ken

3

Configuration, RRC 1258 / Problem with Setup FT817 with HRD

« on: 2014-07-10, 06:47:17 »

Hi,  I am a new owner of thr 1258Mk2S units.

I will be living 50% of my time in Bangkok, and the other half at home at VK4. I am setting up to have fun from BKK in what little spare time I will have.

I have set the  pair up for Mode 3 FT8x7 etc strapped appropriately and have communication.  Audio, Mic PTT etc all work.  All good so far.

I wish to use HRD to control the 817.  I am having no luck connecting

I have used a usb>rS232 into com2 on thr Cont unut
II have also tried setting USB>com2 and using the usb cable.  Same results.

I have run setup to get the Virtual Com ports appearing.  Tried them all esp the one mapping to Com2.  No Luck.

Settings attached

Cheers 
Ken VK4GC

HELP  I leave for BKK in 8 days.