Messages

1

General discussion forum / Icom ID-5100 or Yaesu FTM-6000R Compatability

« on: 2023-11-09, 21:33:48 »

Are either of the radios mentioned above compatible with the RRC-1258 configuration for remote use?

Thanks in advance.

Gary
WB9AYD

2

Configuration, RRC 1258 / TM-D710 and Packet TNC

« on: 2020-01-15, 17:38:36 »

Has anyone had success in implementing the built in TNC in the Kenwood TM-D710 via Remoterig? I see in another post there was an issue with no PTT. I am using Winlink Express with a com cable plugged into the 710 head. It initializes fine but no transmit. I know that no DTMF tones can be sent via the standard mic but I thought this would be a different approach to communicate from the head TNC over the internet to the radio body. Appreciate any ideas or potential solutions.

73
Gary
WB9AYD

3

General / Network Question-RRC-1258 vs MicroPC/Nano Connection Challenge

« on: 2017-06-13, 04:36:10 »

I presently have the RRC-1258 MkII pair working fine, connected via hardwired to my home network. It also has the wireless module installed and also works fine. If I try to connect to the radio side using the Micro PC program (with the dongle plugged in of course), also connected hardwired, I receive a timeout error. I get the same error trying to connect with the Nano app on two different Android devices wirelessly. As a side note, I can use VPN to get out and connect that way wirelessly on the Androids. That is my clue that ports are being blocked beyond the one assigned device being the RRC. I use SIP port 5060 and 11000 and 12000 respectively for the other ports. I have verified multiple times that the ports and passwords are correct on both ends as well as the DDNS via remoterig.com.

I suspect this is a Frontier router (FiOS-G1100) situation that is locking ports to a device but I am at a loss as to why I can't at least get the PC program to connect via a wired or wireless connection and function no differently than the control side of the RRC-1258. I suspect I am too close to this and the obvious is right in front of me. Any ideas from the network pros?

73
Gary
WB9AYD

4

General / Re: App Trial Period Has expired

« on: 2016-08-31, 02:10:28 »

Hi Mike,  can you review mine as well? Getting the same error message.  License fd84,

Thanks!
Gary
WB9AYD

5

General / Re: Elecraft NANO App steals microphone on Samsung Tab 4 w/Lollipop 5.1.1 O/S

« on: 2016-01-26, 01:59:30 »

Jan, the new release of Nano for Kenwood gave me back the Skype microphone which had been silent since 5.1.1 was released on my Samsung S2 tablet. Glad that was solved. I'll try the VFO's referenced above. Thanks again for fixing the microphone issues.

6

General / Re: Volume Adjust on Phone Not Adjustable

« on: 2015-10-22, 05:10:47 »

Has 1.3.8 been released to the App Store? Nothing has shown up yet in the store.

Gary

7

General / Re: Volume Adjust on Phone Not Adjustable

« on: 2015-10-12, 21:24:36 »

Thanks Roland!

8

General / Re: Volume Adjust on Phone Not Adjustable

« on: 2015-10-10, 15:09:34 »

Agreed but in previous versions the volume adjustment worked. If someone has accidently turned down the media volume on their phone and tried to use the app slider for volume and discovers no audio there is no way to turn the phone's media volume up as it is disabled while the app is running.

Gary

9

General / Volume Adjust on Phone Not Adjustable

« on: 2015-10-10, 05:16:49 »

Version 1.3.7, Nano Kenwood will not allow for volume adjustment on phone or tablet. The app volume slider works fine but not the controls built in on a Samsung S6 phone and Samsung  S tablet. It appears to be disabled so if the device's volume is turned down no audio is heard with slider all the way up in the app.

Gary
WB9AYD

10

General / Re: RRC NANO Kenwood 1.3.0 - RRC NANO Service not found

« on: 2015-09-08, 14:39:08 »

All works great on a Samsung Galaxy Tab S tablet!

Thanks!

Gary
WB9AYD

11

Configuration, RRC 1258 / Convert RRC-1258MkII Radio to RRC-1258MkII Control

« on: 2015-08-04, 01:31:10 »

I have a complete Remoterig setup functioning now on a TS-480. I wanted to have available another head setup to access the TS-480 from a different location. I have an extra individual 1258MkII RADIO box but it looks like I need the 1258MkII CONTROL box version instead to connect to my existing setup. Is it possible to reconfigure it to act as a control box? I don't need the CW speed control for this application. Thanks for any help.

Gary
WB9AYD

12

General / Re: Nano Service not on Play Store

« on: 2015-06-24, 16:49:32 »

Roland, just an fyi, I am running your beta on my Samsung Tab S tablet fine. I do have some slight sputtering of audio but I suspect I may need to adjust the buffer a bit. It is great to have it running on my tablet now! Great job!

Gary

13

General / Re: SIP issues

« on: 2015-04-04, 02:01:42 »

I use Verizon for my Samsung S3 wireless and my workaround was to download the app OpenVPN. This created a VPN connection and Nano works perfectly this way using a 4G network. When I am done, I disconnect from the VPN.

Gary
WB9AYD

14

General / Re: Nano Service not on Play Store

« on: 2015-04-02, 02:38:48 »

Could the app CSipSimple be used? It looks to be extremely flexible.

15

General / Re: Nano Service not on Play Store

« on: 2015-03-16, 14:17:34 »

Roland, can another Android app like csipsimple fill the gap to provide the necessary voip server for the Nano K? Could Nano K point to another voip/sip app in cases like this?

Thanks for your comment. I love using this app on a tablet.

Gary