1
Configuration, RRC 1258 / Re: Cat control and CW-keying with K3/0
« on: 2016-03-16, 14:20:43 »
Yes Jan, I would like to try it on my Win10 PC
73 de Olaf
73 de Olaf
Show Posts
This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.
Pages: [1]
2
Configuration, RRC 1258 / Re: Cat control and CW-keying with K3/0
« on: 2016-03-14, 14:45:11 »
Yes Mitch, I have used your checklists for setting up the remotes and it was a great help in the process 
I have CAT controll OK via COM1, but I am not able to use the winkeyer function with writelog
I have searched the forum for different solutions on how to add PC-keying, but I am still looking for the answer
Could it be possible to use the KEY input on the K3/0 for PC-keying?
I believe this is for connecting a straight key?
73
Olaf
I have CAT controll OK via COM1, but I am not able to use the winkeyer function with writelog
I have searched the forum for different solutions on how to add PC-keying, but I am still looking for the answer
Could it be possible to use the KEY input on the K3/0 for PC-keying?
I believe this is for connecting a straight key?
73
Olaf
3
Configuration, RRC 1258 / Re: TS-480 CAT one way
« on: 2016-03-13, 16:33:57 »
Tu Mikke
I went back to Win7 and now it works :-)
73 de Olaf
I went back to Win7 and now it works :-)
73 de Olaf
4
Configuration, RRC 1258 / Cat control and CW-keying with K3/0
« on: 2016-03-13, 16:32:50 »
Hi,
I wonder if anyone has succeeded to have both CAT control and CW-keying working at the same time with the K3 twin setup
I am using Writelog and have not been able to to sort this out
My PC is connected to the USB Com port on the Control RRC for CAT control
I have tried to use COM3(Extra) mode for Winkeyer, but Writelog immediately keys PTT when it starts.
This has been described before here
http://www.remoterig.com/forum/index.php?action=printpage;topic=1805.0
Is there any other way to get CAT and CW keying going at the same time and does the Winkeyer work with any other software?
73 de Olaf
LB8IB
I wonder if anyone has succeeded to have both CAT control and CW-keying working at the same time with the K3 twin setup
I am using Writelog and have not been able to to sort this out
My PC is connected to the USB Com port on the Control RRC for CAT control
I have tried to use COM3(Extra) mode for Winkeyer, but Writelog immediately keys PTT when it starts.
This has been described before here
http://www.remoterig.com/forum/index.php?action=printpage;topic=1805.0
Is there any other way to get CAT and CW keying going at the same time and does the Winkeyer work with any other software?
73 de Olaf
LB8IB
5
Configuration, RRC 1258 / Re: TS-480 CAT one way
« on: 2016-03-12, 17:27:47 »
I am using writelog to control my K3 and I have exactly the same problem with CAT controll on COM1
Control RRC is connected to PC via the USB port
I can not use COM2 because it`s occupied with the K3 twin setup
I am also able to type in frequencies , mode and change bands etc, but i can not read anything from the radio
I have tried to change baud rates on COM1 and other things but nothing helps
The CAT data is only coming throuh one way
COM0 baudrate 38400
COM0 data bits 8
COM0 stop bits 1
COM0 parity 0
COM0 Program mode 3 char timeout 2
Use USB Com Port as COM0 0
COM1 mode 7
COM1 baudrate 4800
COM1 data bits 8
COM1 stop bits 1
COM1 parity 0
COM1 rts/cts 0
COM1 terminator (hex) 00
Use USB Com Port as COM1 1
COM2 mode 9
COM2 baudrate 38400
COM2 data bits 8
COM2 stop bits 1
COM2 parity 0
COM2 terminator (hex) 00
Use USB Com Port as COM2 0
COM3(Extra) mode (USB-COMFSK) 0
Any ideas Jan or others?
73 de Olaf
LB8IB
Control RRC is connected to PC via the USB port
I can not use COM2 because it`s occupied with the K3 twin setup
I am also able to type in frequencies , mode and change bands etc, but i can not read anything from the radio
I have tried to change baud rates on COM1 and other things but nothing helps
The CAT data is only coming throuh one way
COM0 baudrate 38400
COM0 data bits 8
COM0 stop bits 1
COM0 parity 0
COM0 Program mode 3 char timeout 2
Use USB Com Port as COM0 0
COM1 mode 7
COM1 baudrate 4800
COM1 data bits 8
COM1 stop bits 1
COM1 parity 0
COM1 rts/cts 0
COM1 terminator (hex) 00
Use USB Com Port as COM1 1
COM2 mode 9
COM2 baudrate 38400
COM2 data bits 8
COM2 stop bits 1
COM2 parity 0
COM2 terminator (hex) 00
Use USB Com Port as COM2 0
COM3(Extra) mode (USB-COMFSK) 0
Any ideas Jan or others?
73 de Olaf
LB8IB
6
Configuration, RRC 1258 / Re: Control unit is now "Radio version" in Setup manager
« on: 2016-03-07, 01:16:42 »
I did a factory reset on the control RRC and the PWR LED now has a steady light and the RRC still shows up as the control version
The DNS status field shows: OK, remoterig.com = 213.180.92.20
Maybe things are looking more promising..
I will continue tomorrow
73 de Olaf
LB8IB
The DNS status field shows: OK, remoterig.com = 213.180.92.20
Maybe things are looking more promising..
I will continue tomorrow
73 de Olaf
LB8IB
7
Configuration, RRC 1258 / Re: Control unit is now "Radio version" in Setup manager
« on: 2016-03-07, 01:01:16 »
Hi Mike and Mitch,
I will try to clarify
I configured both units and everything was working perfect inside the network at the remote QTH with some help from Mitch :-)
The radio RRC has been offline since i left the remote last Thursday
I went home happy with the control unit and connected it to my home network with LAN cable and USB cable to my home PC
When i opened setup manager it showed up as radio version in "Netinfo/find - find devices" in Microbit set up manager"
When I clicked on "browse device" the URL showed http://10.0.0.83 with the radio version page
I then changed my control RRC back to "control version" using the recipe "RecoverControl/Radio unit" on this page http://www.remoterig.com/wp/?page_id=1695
After doing this my control RRC now shows up correct as the "control version" , but all the settings have disappeared..
Not sure if this is related, but another strange thing after this issue is that the PWR led is blinking on the control RRC and the browser DNS status field states:
"No DNS server configured" or "OK, remoterig.com = 213.180.92.20"
I am using DHCP in my setup
The "Net info/find tab" looks like this:
MAC : 00:1e:fd:01:9f:95
IP address: 10.0.0.83
Netmask : 255.255.255.0
Gateway : 10.0.0.138
DNS : 193.213.112.4
I would like to get things sorted out at the control site before I try to connect to the remote
73
Olaf
I will try to clarify
I configured both units and everything was working perfect inside the network at the remote QTH with some help from Mitch :-)
The radio RRC has been offline since i left the remote last Thursday
I went home happy with the control unit and connected it to my home network with LAN cable and USB cable to my home PC
When i opened setup manager it showed up as radio version in "Netinfo/find - find devices" in Microbit set up manager"
When I clicked on "browse device" the URL showed http://10.0.0.83 with the radio version page
I then changed my control RRC back to "control version" using the recipe "RecoverControl/Radio unit" on this page http://www.remoterig.com/wp/?page_id=1695
After doing this my control RRC now shows up correct as the "control version" , but all the settings have disappeared..
Not sure if this is related, but another strange thing after this issue is that the PWR led is blinking on the control RRC and the browser DNS status field states:
"No DNS server configured" or "OK, remoterig.com = 213.180.92.20"
I am using DHCP in my setup
The "Net info/find tab" looks like this:
MAC : 00:1e:fd:01:9f:95
IP address: 10.0.0.83
Netmask : 255.255.255.0
Gateway : 10.0.0.138
DNS : 193.213.112.4
I would like to get things sorted out at the control site before I try to connect to the remote
73
Olaf
8
Configuration, RRC 1258 / Re: Control unit is now "Radio version" in Setup manager
« on: 2016-03-06, 18:17:56 »
Thank you Mitch
I changed to "type=control" in the web address and now it is showing control version again in setup manager
However, all my settings done at the remote site on the control unit is gone...
Maybe I should change to the latest firmware
I received them with version 2.88
73
Olaf
I changed to "type=control" in the web address and now it is showing control version again in setup manager
However, all my settings done at the remote site on the control unit is gone...
Maybe I should change to the latest firmware
I received them with version 2.88
73
Olaf
9
Configuration, RRC 1258 / Control unit is now "Radio version" in Setup manager
« on: 2016-03-06, 17:49:08 »
Hi,
I am trying to set up my remote with the K3/0 for the first time.
After having everything working at the remote location I am now home with the RRC Control unit (The one with the CW knob)
When attaching the RRC control unit to my home network it shows up in setup manager as the Radio version?
When I browse the device I get the radio version settings page and I am stuck...
Can someone clarify what is going on here?
73
Olaf
LB8IB
I am trying to set up my remote with the K3/0 for the first time.
After having everything working at the remote location I am now home with the RRC Control unit (The one with the CW knob)
When attaching the RRC control unit to my home network it shows up in setup manager as the Radio version?
When I browse the device I get the radio version settings page and I am stuck...
Can someone clarify what is going on here?
73
Olaf
LB8IB
Pages: [1]