Messages

1

General discussion / Re: 1.11.0 How to install

« on: 2023-05-24, 08:22:27 »

Hello Mike-san,

Thanks for your prompt reply. I contacted Limmared Radio yesterday to inquire about 1274B inventory.
The inventory status of Limmared Radio's web shop is in stock.

73, Kazu JG1TSG

2

General discussion / 1.11.0 How to install

« on: 2023-05-23, 10:49:49 »

I'm using 1274A and 1.8.2.0. I decided to use 1274B, but do I have to uninstall 1.8.2.0 before installing 1.11.0? Or is it possible to install by overwriting? My 1274A and 1.8.2.0 are working fine on windows11.

3

General discussion / Audio from Laptop PC

« on: 2016-01-06, 10:25:23 »

Hello RRC users,
RRC-Micro PC-Client is working very well. My rig is TS-990 and  software is Kenwood ARPC-990. Laptop PC is windows10.
I can hear audio of TS990 through the PTT BOX ( Headset is connected to PTT BOX)
I would like to hear audio from TS990 through speaker of Laptop PC.  I set Speaker to PC speaker Instead of Microbit 1274A speaker on the RRC-Client software.
but no audio. Indicator Bar on the PC-Client is empty. but speaker indicator is mooving.  I have some mistake?

4

General discussion forum / Re: TS-590 TWIN

« on: 2015-02-19, 08:37:42 »

It is a good news!

Possibly TS-590 Twin mode is working with TS-590(G) without some command.

Under the new firmware , The ALC meter is not working at control site (not Radio site) ?

Thank you very much for the report.

Kazuya / JG1TSG

5

General discussion forum / Re: TS-590 TWIN

« on: 2015-02-17, 11:09:47 »

Thank you for the quick reply Mike san.

I do not understand about protocols. But I have found that there are some difference
in PC commands. ( I think these are not so imporatant commands).

6

General discussion forum / TS-590 TWIN

« on: 2015-02-17, 01:05:37 »

Hello

I am useing TS-480 & RRC-1258MK2. It's working very well. I will chenge my rig to TS-590(G).
IS RRC-1258MK2 Twin Mode work with TS-590(G) like TS-590(S) ?  (G)=new type
Please advice.

Kazuya / JG1TSG

7

General discussion forum / SIP Connect via MIC UP button

« on: 2015-01-28, 04:54:42 »

IN Yaesu General mode , SIP-connect/disconnect can be controlled by MIC UP Button ?
ICOM and KENWOOD There are adescription in the manual. But YAESU...

8

General discussion forum / Re: K3/0 mini and RRC1258MK2 JMP setting

« on: 2014-12-26, 09:12:45 »

Thank you Mitch san.  I will try.

9

General discussion forum / K3/0 mini and RRC1258MK2 JMP setting

« on: 2014-12-25, 02:09:25 »

I am useing TS-480 with RRC-1258mk2. working very well.  I will chenge my rig to K3/0 mini at control site and K3 at radio site.
But I dont understand setup JMP1...JMP5 in RRC-1258mk2.

RRC-1258mk2 control site
JMP1 in place ? / JMP2  ?  / JMP3  ? /  JP4 ? / JMP ?

RRC-1258mk2 Radio site
JMP3 in place ? / JMP5 in place ?

I will use MH-2 condenser microphone with k3/0 mini.