Messages

1

General discussion forum / Re: RRC-Micro with a Kenwood TS-480

« on: 2010-11-14, 03:55:52 »

All is well now.  The release of the RRC and the micro client made my TS-480 connect and play with HRD today.  Great job with the latest Beta guys.  I really appreciate it!

73 de wi4usa

Thom

2

General discussion forum / Re: Problems connecting a TS-2000 through HRD

« on: 2010-11-03, 00:45:32 »

Same issue with the TS-480.  Good luck if you figure it out.

3

General discussion forum / Re: RRC PC-Client virtual com ports

« on: 2010-10-24, 19:54:05 »

I have an rrc-1258 connected to a Kenwood TS-480 at wi4usa.dyndns.biz.  There is no password and it is upgraded to the latest release.  Please feel free to connect to it and connect a dongle from you end and try to get the serial ports to work. 

I would also be glad to test  any new software that you have.  Just let me know where to download it.  You can contact me directly at thomas.jw.baxter@gmail.com

4

General discussion forum / Re: RRC PC-Client virtual com ports

« on: 2010-10-21, 22:43:52 »

Better yet, hook up a TS-480 and let me try to access it with my dongle using HRD.  If it works, we know its not the computer nor the software of the computer.  I'm glad to help resolve this.

73 de wi4usa

Thom

5

General discussion forum / Re: RRC PC-Client virtual com ports

« on: 2010-10-21, 22:41:50 »

I would be more than glad to allow you to log in my remote and try to access the radio and serial port.  Let me know when your ready and you can try it to your hearts content.

6

General discussion forum / Re: RRC PC-Client virtual com ports

« on: 2010-10-21, 00:46:04 »

I have the same issue.  If you get it working, please advise.  I have tried everything and the com ports just dont work.  I have tried it on two different computers using windows xp 32 bit SP2.

73 de wi4usa

Thom

7

General discussion forum / Re: RCC Micro PC client & TS480

« on: 2010-10-21, 00:44:15 »

If you get it to work, please let me know, I have not been successful in doing this.  I would really like someone that is successful to contact me and go through their exact settings.

8

General discussion forum / Re: RRC-Micro with a Kenwood TS-480

« on: 2010-10-08, 00:19:09 »

I have a standard serial cable from com2 on the interface to the radio.

9

General discussion forum / Re: PC Client connect but do not work

« on: 2010-10-06, 01:53:46 »

Did you ever figure this out. I'm having the same issue accept with a Kenwood ts-480

10

General discussion forum / RRC-Micro with a Kenwood TS-480

« on: 2010-10-06, 01:48:25 »

I hope someone can help. I have the RRC-1258 MKII and the RRC-Micro that I'm trying to get to work with a Kenwood TS-480. I am using Windows XP 32-bit. The software installed fine and I have com 8 - 10 created as virtual ports by the software. I am able to connect to the sip fine. My baud rate on the radio is set to 57,600. What I'm not able to do is to use the com ports to get cat data for Ham Radio Deluxe. What am I doing wrong?

I am assuming that com0 is used for the rrc-1258 to communicate to the RRC-Micro. Should I put cat control on com1 or com2. I have tried both with no success. Ham radio deluxe just will not connect to the com port. I am connected to the sip fine. You can try to connect on your own at wi4usa.dyndns.biz. There is no password at this point until I can get it working. Has anyone done this configuration and got HRD to get cat info from the serial port? Can someone please, please send me all of your settings.

By the way, I also own the control portion of the RRC-1258 as well and I am able to control the radio through the remote head no problem. So I know the wiring is correct. I just can't get the serial port working when using the RRC-Micro.

Someone please help!

73 de wi4usa

Thom
thomas.jw.baxter@gmail.com