Show Posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.


Messages - RadioCampbell

Pages: [1]
1
Mike,
Thanks for the instructions.  It turned out to be a bent contact on the connector for the TTL input on the Control unit.  I have it working now on my home network over WiFi.  I am sometimes getting frequent short dropouts on the receive audio.  Will now work on making contact to it from the internet. 

Barton

2
I just made the cables, put in the straps and WiFi options, set the jumpers, built the TTL cables, and configured my Control and Radio units of my RRC-1258 MkIIs for my network.  From the browser interfaces, the units show:
Control:
Status
Name   Value
P5.4   ON
Radio   OFF
Connection status   OK
SIP status   Connected/transfering
Last SIP error   None
RTP status   Excellent(60)
UDP cmd status   OK(37)

Control:
Status

Name   Value
P5.2   ON
Connection status   OK
SIP status   Connected/transfering
Last SIP error   None
RTP status   Excellent(59)
UDP cmd status   OK(27)
SIP command timeout   0

both show:
DNS status   OK, remoterig.com = 213.180.92.125

I have double checked the placement of the straps, the jumpers, and the wiring of the TTL cables.  I have checked for continuity at the connector pins of the TTL cables.  I have verified that the connector at the TM-D710 control panel has 9 V between pins 6 and 7, and that the connector at the Radio Unit TTL port has 10 V between pins 2 and 3. 

Both units show steady green and yellow lights, no red.  I have tried restarting them multiple times, and holding down the power on button on the TM-D710 control panel for different lengths of times.  The control panel never lights up.

When I restart the control unit, I hear a beep on the headphones when the yellow light comes on.

What else can I do to track down the problem?

Barton N6HDN

3
General discussion forum / Re: Microbit Setup App
« on: 2021-03-12, 05:33:21 »
Same problem with my RRC-1258 listed at the top but hidden under the "Microbit Setup App v1.0.1" text on my iPhone 12 plus Max.

Pages: [1]