Messages

1

General discussion forum / Re: No PTT using IC 2820 on fixed IP's

« on: 2010-11-14, 21:28:15 »

Problem is solved, exactly by the recomended action. After changing of jumpers everything is working well under the special license of OE3NKA_REMOTE. Your can find further information about this public Internet Remote Base Station at www.qth.at/oe3nka_remote  - now with an IC2820, powered by RRC-1258MkIIs

Mny thanks Mike for your prompt support!

vy73 de Norbert

2

General discussion forum / No PTT using IC 2820 on fixed IP's

« on: 2010-11-09, 07:31:05 »

after installing the equipment audio and controlling is running perfect now. But pushing the PTT,  sound on controller side mutes, but there is no transmission activated. What could be wrong?

I'm using fixed IP adresses on both sides, ports are free and due to an other sip installation I changed the sip port on both sides to 5061

vy 73, Norbert

3

General discussion forum / Re: Confused by wiring the RJ11 RJ12 Modular plugs

« on: 2010-10-27, 07:37:33 »

Meanwhile by "TRY AND ERROR" I found out, that the wiring diagram is numbering not corresponding to the norm, but according to the drawing. One side upper view; one side bottom view.

4

General discussion forum / Confused by wiring the RJ11 RJ12 Modular plugs

« on: 2010-10-25, 17:01:25 »

Hi all,
in the wiring schemes the modular plugs are shown on one side with the locking clip (let's say upper side)  and on the other side of the cable with the contact-pins? (bottom-side)
But the numbers of the contact in both cases are nubered from 1-6 

Does that mean wireing from pin2 to pin2 is crossed and in reality it means from Pin 2/6 to Pin 4/6 if I take normative numbering of Pins???