Hi,
i tested a TS 480 in my LAN. I tested only power on and it works.
Then i use my notebook in lan-bridge-mode, connecting RRC control via cross over cable and
using a UMTS stick in USB port.
On radio side i connected RRC radio to Fritz Box 7050 DSL Router . Using port forwarding.
Can`t find something about DMZ = enable, testing with "exposed hosts" 192.168.0.228.
By the way: all cables connected, but not the MIC cables on both sides of the RRC
After testing POWER ON at TS 480 the result is: yellow LED AUX/MIC is flashing
an i hear an error code (dit dät döh),
I looked for SIP contact under Radio settings of control RRC: there stands from the
last test in LAN the IP of radio RRC 192.168.0228. I changed in dyndns host name
like myadress.dyndns.org - but also the same error, no connection
under status i find: dns status = error, failed to resolve remoterig
Only one positive test:
from UMTS side via Internet i connected the RRC radio box with
http://myadress.dyndns.org:58Any idea where is the mistake?
1.) UMTS stick connection via lan bridge configuration of the notebook
or (any other idea how to use a notebook with UMTS stick on control side?)
2.) settings of the RRC`s?
or
3.) setting of the Fritz Box Router?
73
Kai
After this (restarting)
Show Posts
for need a little help.