Messages

1

General discussion forum / Re: DIGIMODES - RRC1258MkII - TS480SAT

« on: 2011-10-04, 18:25:30 »

Hi Marcelo,

I do not have problems with decoding RTTY or PSK once the volume controls are set properly.  You have to adjust the volume on the 480 control head the the Signal carefully.  It is easy to overdrive the audio to the computer.

I would prefer to get line level audio from the RemoteRig but I have not figured out how or if it can be done.

Dave, NB3R

2

General discussion forum / Re: DIGIMODES - RRC1258MkII - TS480SAT

« on: 2011-08-29, 18:45:38 »

Yes, the Signalink is at the Control end.  I do not want a computer running at the "Radio" end of the RemoteRig.

I source the audio from the headphone jack on the 480 control head to the "SPKR" input of the Signalink. I connect an external speaker to "MON" on the Signalink.  I connect the "Radio" output from the Signalink to the "Mic" input of the RemoteRig.  I use this set up for PSK and AFSK. 

I have not figured out how to get line level audio from the RemoteRig and not sure if this is possible.

Good Luck with your set up.

NB3R
Dave

3

General discussion forum / Re: DIGIMODES - RRC1258MkII - TS480SAT

« on: 2011-08-23, 13:34:01 »

I process the audio from the control end using the Signalink (www.tigertronics.com).  The PTT cable from the Signal link is connected to the MIC input of the RCC.

de
Dave
NB3R