Hi
- I do not recieve any audio through my USB headset until I move the audio slider in HRD to something greater than 50 and then back to a more normal level of 25 or so.
That's normal, it's how the design of the TS-480 is done, it's nothing do about it.
I am experiencing frequent timeouts that stop operation while running from my wireless router with 15 Mbps download and 1.5 Mbps upload. I am currently attempting to turn off all power management routines in my Samsung Series 9 laptop running 64 bit Windows 7. Any other suggestions?
No if the connection is stable it should never disconnect.
I realize that I am very spoiled with the near perfect operation and no detectable latency of my remoted TS-480 head on my own LAN by using my own 5.8 GHz internet bridge from my tower location 4.14 statute miles away. I am experiencing about a second of delay with the RRC-Micro. What settings are recommended for reducing latency?
The latency is depending on the buffer settings, just like in RRC-box + the buffer mutliplier. It can never be seconds. If the latency is so long it must be something wrong with the PC.
In general you can never expect a PC-solution to be as good as a embedded system which is special designed for the job. The PC-software have to share the resources with all other programs and the OS. That's why I always recommend the boxed system for daily use and the the PC-Client as a complement when travelling etc.
73 de mike
