I need help starting over!!!

[WQ0P]

This stuff is killing me!!!!!
I have spent all day trying to get this to work!!!  Worst part is I know
I do not know what I am doing!!!

I had it all working at one time.  I have a pair of the RRC-1258IIs units that
I am using with a TS-2000.  It was working many months ago. 

Today I installed the latest"Microbit Setup Manager v1.19 and I can talk to
both units one at a time.

Today I installed the latest Firmware Update 2.66 and bootloader 1.9.  That all seems
to have installed correctly.

I can access both the Remote, and Control RRC through my web-browser using default addresses on RRC's

I CAT V cable both RRC's into router/hub

I cannot remember what all I have done, but all I have ever gotten, and always get is the series of beeds.....

beep beep beep............beep beep beep.........beep beep beep........

All I want to do is reset everything and start over, but I do not know how.

Any and all help would be great.  This is frustrating as hell!

Thanks Greg

[sm2o]

The tone you hear is the same tone that you hear when a phone call cannot be connected here in europe, I guess the only thing you have wrong is the SIP-contact. It's like the phone number the control RRC use to call the radio RRC. In this case the ip number to the radio-rrc. You find it under Radio-settings in the Control-RRC.

Factory default reset can be done by pressing the reset button for 25 seconds, but it's not needed when you have come so far.

73 de mike

[WQ0P]

Mike,
That was the correct direction to push me....
I replaced my dyndns address of 64.4.whatever
with 192.168.1.1 and I now have it working on
my radio desk just going through a router switch.
So it is working on the LAN, now to try it through
the wireless internet.    Thanks for the help...
but I am not done I believe asking for help.
I am using Linksys WRT54GL's with DD-WRT version 23 which
should probably be upgraded.
Thanks Greg

[sm2o]

Great!

Yes I use 54GLs with DD-WRT v24 my self, they are working perfect

73 de mike