I am operating a pair of 1258 MKII units Version 5 with firmware 2.75
Company Microbit
Product 1258
PID 4
Version 5
HW 6
Software 2.75
Bootloader 1.8
Compiler 4.6.2
Build Oct 31 2013 16:36:10
ROM/RAM 450472/41872
ETH-RAM 2944 (max 3kB)
USB-RAM 15312 (max 16kB)
ResetSrc 0 [3]
Uptime 1 Days, 3 Hours, 24 Mins, 37 Secs
Serial number 3506
I am operating a Yaesu FT-100d with the head at the "control" end.
I am having a problem with the Codec Inp Gain of the radio unit.
The units are running on a transparent Wi-Fi link, so both are setup on the same LAN as 192.168.0.XXX
On the web page setup for the radio unit, I can decrease Codec Inp Gain, "submit", and "apply changes". The unit re-starts and the audio from the radio is decreased appropriately.
However, if I wish to increase Codec Inp Gain, I click "submit", and "apply changes". The unit re-starts, however, the audio levels are not changed.
I find that if I go to the remote site and remove and then restore power to the unit then the Codec Inp Gain increase will actually take effect.
This seems like a firmware issue to me. I wonder if anyone can replicate this ?
Thanks, Steve-dog, k5dog
