firmware 2.21 - unstable?

[f1tmy]

I'm using auto for all sets. I miss an over problem, if i use the ptt switch for long time (15s) the trx stay often on tx. I need to push again the ptt to go back to rx...
The problem is the same with 2.25 so I'll return to 2.15.
If it's possible I would like to have 2.10 again to download.

73''

[Jan (Microbit)]

I'm using auto for all sets. I miss an over problem, if i use the ptt switch for long time (15s) the trx stay often on tx. I need to push again the ptt to go back to rx...
The problem is the same with 2.25 so I'll return to 2.15.
If it's possible I would like to have 2.10 again to download.

73''

You are using "Auto" and still have network related problems? Which speed does the switches/hubs/routers you have the RRCs connected to? 10 Mbit, 100 Mbit or even faster?

[sm2o]

Hi

I have put back 2.10 on the firmware page. I have also tested to back from 2.25 and it's no problem.

So let's see what's happen if you back

73 de mike

[f1tmy]

Thank you 
Now i'm back with 2.10 :
- no more ptt blocked,
- I still have sip connection loose but now it's very short (less than 0.5 second, before it was 1-2 second), and not so often.
73''