TS-480HX won't power up

[DG8KD]

Hi

You cannot do like that, the radio must be powered up before the connection is done, so it's ready to receive data from the front panel. If it worked before it was just luck. If you want to control the PS with the output set it to I/O and controll it manually via the browser instead.

73 de mike

Hi,

just for interest ( and due to the fact that I have the same behavior):

What is the best order to power up the system consisting of a TS480 and the RRC1258 spliited on two locations?
What device to start first? Radio or Front Panel? Before or after powering the RRCs? Which one first?

BR
Rainer

[Jan (Microbit)]

Powering the different devices can be done in any order, but obviously when attempting to connect the radio RRC/radio must be turned on(have power).

[DG8KD]

Thanks Jan,

Any hints how to rise the number of sucessful attempts to power up the remote site?
I have connected the remote side to one PSU (13,8V @25A) which powers radio and RRC. The PSU is started via WEB switch.
Often pressing the ON button on the front panel does not lead to a lightend up front panel.
(RRC on latest FW)

[sm2o]

The system is designed to be powered up 24/7 if you switch off power from the Radio-RRC the DDNS and DNS system will not be updated until you you switch on the Radio-RRC so it can take a while  before it works if you have powered off the Radio-RRC and the public IP has changed

73 de mike

[DG8KD]

Thanks for the explanation.
That could be the reason, but I hate wasting energy for 24/7 if not really needed....