« previous next »
Pages: [1]

Author Topic: SIP contact box  (Read 6263 times)

kc6wrd

  • Newbie
  • *
  • Posts: 11
    • View Profile
    • Email
SIP contact box
« on: 2017-01-22, 21:18:29 »
I use my FTM-350 control head (via RRC-1285 on my own LAN)  to control the FTM-350 body as mountain top remote base on the same LAN segment. To do so I use the IP address in the SIP contact box. I also use the control head in my ONSTAR WiFi equipped vehicle using the "Own host name" in the SIP contact box for DDNS access. Each time I move between home and vehicle I have to log into the remote rig setup and change the SIP contact box which is quite cumbersome. Is there and way around this or any plans to add a toggle switch to select between SIP info?

Thanks.

Logged

sm2o

  • Administrator
  • Hero Member
  • *****
  • Posts: 3041
    • View Profile
    • sm2oan
    • Email
Re: SIP contact box
« Reply #1 on: 2017-01-22, 21:40:43 »
check the chapter about profiles, you can use the CW-speed knob to change between the profiles

/micke
Logged

kc6wrd

  • Newbie
  • *
  • Posts: 11
    • View Profile
    • Email
Re: SIP contact box
« Reply #2 on: 2017-01-22, 23:49:46 »
Awsome! Works Great.
Thanks.
Logged
Pages: [1]
« previous next »