Author Topic: Network Noise Problems  (Read 20797 times)

dk3ww

  • Newbie
  • *
  • Posts: 8
    • View Profile
    • Email
Re: Network Noise Problems
« Reply #15 on: 2011-01-21, 12:56:39 »
OK Mike,
sorry for my inaccurate description. The remote qth is used by several members of our club. The operating configuration is the following:

We are using a TS480 cofiguration with
RRC-radio side with Firmware 2.10 and the control side with Firmware 2.10 or 2.12  ---> all OK.

Since we had increased the firmware at the control side to 2.33 we have all the same problem with --> network noise.

It comes from the speaker of the ts480 panel if the connection to the radio side was carried out ( also without AF  level ). My friend Holger, DL7AU will renew the Firmware on the radio side today. So we hope that this problem will be solved with the new firmware 2.33 on the radio side...

What do you mean, Mike?

73 - Uwe
DK3WW



sm2o

  • Administrator
  • Hero Member
  • *****
  • Posts: 3041
    • View Profile
    • sm2oan
    • Email
Re: Network Noise Problems
« Reply #16 on: 2011-01-21, 13:05:39 »
Ok

then I understand, And if you check the firmware page, both at v2.20 and v2.26 versions, both units needed to be updated. So 2.33 against a 2.12 will not work  properly as the Audiostream format is changed

73 de mike