ProSiStel no link

[IZ7ANL]

Any link is avalable on page ProSistel Rotor. Any body can help me to configure and a picture to connect RS232.
My best regard
Nick 73

[ON4AOI]

check one of my previous post with schematics

Guy ON4AOI

[IZ7ANL]

I didn't find anythings in old post. May you help me?
73 Nicola

[ON4AOI]

Hi Nick if you do a search for prositel and on4aoi you find it easy

here is the link

http://www.remoterig.com/forum/index.php?action=dlattach;topic=391.0;attach=107;image

Guy ON4AOI

[IZ7ANL]

Many thanks Guy. May you tell me about the setting, serial mode 3 or 5?
73 Nicola

[ON4AOI]

Hi Nicola

Mode should be 3
baud rate = 9600
data bits=8
stop bits=1
parity=0
Rts/cts = Yes

in both boxes

Guy ON4AOI

[IZ7ANL]

Guy,
unfortunaly no play. I used Com1 inverted cable 2-3 but I didn't have succes. Tomorrow I will try Com2 straight cable.
With Daiwa rotor 4 motor Com1 all was ok.
73 Nicola