FT-2000 twin disconnects when changing main VFO frequency

[SA0IAT]

I came across a strange problem; when changing the main VFO the radio/SIP is disconnected after about 10 seconds. No such problems when turning sub-VFO. I can transfer freq from sub to main VFO without any trouble. The problem only appears when changing frequency with main VFO dial or clarifier dial...

BTW radio-rrc status says "Radio: OFF", also when the radio is on and working...?

Any ideas before I go crazy
All input welcome!

[ON4AOI]

This is a Firmware problem
I had this with my FT5K also when I upgraded to a newer release
didn't have time yet to do screendumps.
Go back to the preivious working Firmware and it will be solved.

Guy ON4AOI

[SA0IAT]

Thank you very much Guy!
Just to make sure - you mean the radio´s firmware - not the RRC firmware?

73 de Erik

[sm2o]

Hi

Yes I remember it now when Guy write it. Before you change back. Try to log what happens.

anslut med telnet till control-RRC, tryck på d så du kommer i debug menyn, välj 0 för att aktivera debug på com0, Gör det du gjorde för att den skulle starta om. Kopiera loggen och skicka så kanske vi kan se vad Yaesu ändrat i protokollet. Det kan vara svårt att hitta utan att ha radion på plats men vi kan ju alltid göra ett försök

/micke

[ON4AOI]

Yes its the radio firmware not the RRC firmware

Guy ON4AOI

[ON4AOI]

Eric did you have the possibility to debug ?

Guy ON4AOI

[SA0IAT]

Hi!
Well, appeared that I had some other strange behaviour while debugging.... Anyway I sent what I got to Remoterig. It seems like the protocol was changed quite a bit.
I´m trying a new firmware for RRC-1258 now, and it seems like it is working! Usual fantastic support by Mike & co!

[ON4AOI]

Thats nice to know

[ON4AOI]

Mike, Eric
Found time todo the FTDX5000 twins firmware update with the (beta)release you sended me Mike
and after 30 min testing it appears to be OK now.

Tnx

Guy ON4AOI
 

[sm2o]

OK Guy

Nice to hear that.

73 de mike