K3 problem

[ur5mid]

I'm used K3/0 mini. Everything works fine. But I decided to try to use the remote control without the panel. Such problem: In the HamRadiDelux if I choose COM2 (on my PC COM4), then turn on the radio, I hear sound, but turns off after a few seconds.The program reports, do not read the data frequency. If I connect to COM1 (on my PC COM3), nothing happens at all. COM1 mode 7. What is the problem?
Serge UR5MID

[sm2o]

HI

If you not use the panel you must set the RRCs in program mode = 4 and set com0 baudrates correct, set com2 in parallell with com0 etc
You also has to manually connect on the statuspage. See page 213 in the manual.

73 de mike

[ur5mid]

SM2O, thanks for help. I set in RRC-control mode 4 and i set auto connect. It`s ok. In RRC-radio stay mode k3 twin . I set virtual splitter (VSPE) for COM1 (RRC) and now i use together Win4K3suit and any logger.
Serge UR5MID