Increase Audio Quality choice

[VE6WZ]

Is there a possibility to be able to choose Quality 7 linear? or quality 4, or even 2??

Using the existing low audio quality Codec default on the Micro makes weak signal CW difficult. This especially a big problem with high noise.

thanks,  de steve ve6wz

[dj0qn]

Steve,

You are completely free to use any CODEC that you choose to use. Just keep in mind the synchronous bandwidth
that is required. You can use the details in Appendix A of the manual for details.

73,
Mitch DJ0QN / K7DX

[VE6WZ]

Mitch,

Are you sure you can change the quality on the RCC-Micro dongle??
On the RCC micro settings page I see no option to change Audio quality. Only Jitter size, Jitter Delay and Buffer size.
I thought I had read that the default is set for Quality 0, Alaw 8kHz on the Micro dongle.

[dj0qn]

Steve,

I answered the question without noticing which device you were referring to, sorry. I had assumed
it was for the RRC.

Mike should answer this question. I am not sure if what you say is correct, or if it takes what is set in
the radio RRC. I also remember reading something like that, but am not sure if it was for the Micro or
Nano, or both.

73,
Mitch DJ0QN / K7DX