I changed from a Verizon 3g modem in my RV and had to upgrade to a 4G modem. I also changed the router in the RV to a Cradlepoint (I forget model). I had been unable to get the two to talk to each other either thru my dyndns route or thru the remoterig dyndns. I did finally resolve the connection by getting the IP assigned to the modem (which does not match the public IP found by doing a google search for "My IP").
Once I got the IP off the modem and plugged that into the control box the radio was talking to the control box and the control head (TS-480HX) was receiving fine.
However, as soon as I key the mic the unit stops receiving (on un-key) and appears to be frozen. Then several seconds later it turns off.
I'm assuming this is a configuration within the radio or control head Remote Rig boxes. But I have gone thru everything and can't find anything that appears a configuration error. I have also set the Control Head box as DMZ in addition to port forwarding. Nothing seems to work.
The error message on the radio "status" is UDP audio stalled". The status on the Control box indicates no errors and it is disconnected.
Any ideas?
Thanks,
Ed
K6HP