Author Topic: RC1216H - or other control box  (Read 8488 times)

K6HP

  • Newbie
  • *
  • Posts: 13
    • View Profile
    • Email
RC1216H - or other control box
« on: 2014-08-06, 00:40:32 »
Hi to all,

Wondering if anyone has interfaced the RC1216H, that interfaces with the Acom and Expert amps, to the Ameritron ALS-1300 solid state amp?

If so, any info would be appreciated.

73,
Ed
K6HP

sm2o

  • Administrator
  • Hero Member
  • *****
  • Posts: 3041
    • View Profile
    • sm2oan
    • Email
Re: RC1216H - or other control box
« Reply #1 on: 2014-08-06, 07:47:31 »
Hi
the protocol to communicate with a PA is unique for each PA, so the RC-1216H only works for the PA:s which is listed. eg Expert 1K-FA and ACOM-2000.

Rgds

Mike

K6HP

  • Newbie
  • *
  • Posts: 13
    • View Profile
    • Email
Re: RC1216H - or other control box
« Reply #2 on: 2014-08-06, 10:52:12 »
Thanks for the reply. I was pretty sure that was the answer but had to ask.

Of course, my next question is, does Remote Rig have any plans of making it interface with the Ameritron ALS-1300 at some point in the future?
Thanks again.
73,
Ed
K6HP

sm2o

  • Administrator
  • Hero Member
  • *****
  • Posts: 3041
    • View Profile
    • sm2oan
    • Email
Re: RC1216H - or other control box
« Reply #3 on: 2014-08-06, 11:16:35 »
I had a quick look at the manual, I do not think it's even possible to do anything for the ALS-1300, I can't  see that there is any support for remote control in the way it has to be

73 de mike

K6HP

  • Newbie
  • *
  • Posts: 13
    • View Profile
    • Email
Re: RC1216H - or other control box
« Reply #4 on: 2014-08-07, 00:41:38 »
OK Mike,

Thanks for taking the time to look. I appreciate it.

73,
Ed
K6HP