No connection between RRC Control and Radio

[LA7THA]

Hi All,
I have just start to connect my Remoterig system again after QRT for 14 months. I have upgrade to the latest firmware on RRC Control and RRC Radio unit. I am using version 1 of the Remoterig boxes. I have attached export of all settings as html for Control unit and radio unit. I am using KW TS480 and I try to connect this up all on the inside of my router so fire walls and port forwarding should not be a problem. actually I am using patch cable from remote rig boxes direct in to the lan port of my router. I have connected the display of my TS480 direct to the radio and I can switch power on/OFF no problem. When I connect all cables etc and try to connect there is absolute nothing that happens. Cable from Front panel TS480 to RRC control box front AUX port, then LAN cable to my router. From RRC Radio unit LAN cable direct to my router, Front RS232 on RRC box direct to KW TS480 com port (9600 baud) and RRC Radio AUX port (6pin RJ45) to KW TS 480 Panel socket. (6 pin RJ45)

IS there anything that have changed regarding sip ports etc on latest firmware or similar.

See attached export of my settings. Rename the file back to html, was not allowed to send them as html so I change the name to .jpg just convert back again should work I hope.

73 Rune LA7THA

[sm2o]

I cant read your files but from your text you say 9600 baud, the baudrate (com0) for TS-480 should be 57600 baud

73 de mike

[LA7THA]

Hi, I will resending the files tomorrow when I am back in the shack.

73

Rune LA7THA

[LA7THA]

Hi Mike

The com0 settingas are 57600, i have sent you the file in html format in a seperate email. I am not allowed to attach them as html or bin here.

73 Rune LA7THA 

[LA7THA]

Hi All

I found the problem in RJ45 connector (client/ local RRC box) one wire that was broken.


73 Rune LA7THA