Nano not hooking up

[AE5OQ]

Nano just errors "SIP error: Forbidden (403)" I have gone over all the settings and instructions, but no joy. Oh, by the way why does the Nano ask for "Call Sign" when the RRC1258 doesn't?
Armstead

[Jan (Microbit)]

Which software version does the RRC have?

[roland]

Oh, by the way why does the Nano ask for "Call Sign" when the RRC1258 doesn't?

That's used for licensing

[dj0qn]

I am having exactly the same error trying to access DL5NAM's RRC using Nano. It
works fine on my systems, but not on his. Chris mailed you directly on this problem,
and I see no difference between his installation and mine.

73,
Mitch DJ0QN / K7DX

[Jan (Microbit)]

I am having exactly the same error trying to access DL5NAM's RRC using Nano. It
works fine on my systems, but not on his. Chris mailed you directly on this problem,
and I see no difference between his installation and mine.

73,
Mitch DJ0QN / K7DX

We are looking at Chris' system right now, and it seems it is a port forwarding issue, though we have not verified that yet.

[sm2o]

We found the problem, they where not using the straight port forwarding, so the port numbers shown in the Radio RRC where from the outside forwarded to an other RRC used for a TS-480 with different password.

Conclusion, USE STRAIGHT PORT FORWARDING to avoid confusion.

73 de mike

[Jan (Microbit)]

Nano just errors "SIP error: Forbidden (403)" I have gone over all the settings and instructions, but no joy. Oh, by the way why does the Nano ask for "Call Sign" when the RRC1258 doesn't?
Armstead

PM or email me/us the info needed to connect to your RRC and we will have a look at it.

[dj0qn]

I assumed that if the control RRC works from the outside ok, then Nano should work as well. That doesn't make much sense to me. Strange.

73,
Mitch DJ0QN / K7DX

[Jan (Microbit)]

I assumed that if the control RRC works from the outside ok, then Nano should work as well. That doesn't make much sense to me. Strange.

73,
Mitch DJ0QN / K7DX

If you are referring to Chris' system then what could be the explanation is that the SIP, audio and command ports were wrong in the Nano app and so Nano tried to connect to wrong RRC.

[dj0qn]

I was looking at his radio RRC directly for the settings. That could only  be the case if Chris gave me the wrong RRC to look at (he has two).

73,
Mitch DJ0QN / K7DX

[AE5OQ]

Radio RRC firmware is 2.84

[Jan (Microbit)]

I was looking at his radio RRC directly for the settings. That could only  be the case if Chris gave me the wrong RRC to look at (he has two).

73,
Mitch DJ0QN / K7DX

But it seems they are not using "straight port forwarding", so the port numbers visible in the RRC were not the same as the "outside ports".

[dj0qn]

We are going in circles: it worked fine from Chris' control RRC, so why wouldn't it work from Nano as well? Of course, that is assuming he gave me the correct radio RRC screen shot to use for my test.

73,
Mitch DJ0QN / K7DX

[Jan (Microbit)]

We are going in circles: it worked fine from Chris' control RRC, so why wouldn't it work from Nano as well? Of course, that is assuming he gave me the correct radio RRC screen shot to use for my test.

73,
Mitch DJ0QN / K7DX

No, no circles at all  When we first attempted to connect using the Nano App we used ports 13000-13002. That either resulted in not authorized, or busy. Changing password did not work either. Debugging the RRC show that when attempting to connect nothing happened. Then we changed ports in Nano to those they use externally for that RRC and it started to work. So just looking at the radio RRC which ports are in use did not give correct information as the ports used on the Internet side were different.

[Jan (Microbit)]

Radio RRC firmware is 2.84

Sorry for the confusing in this thread! 

I have successfully connected to your radio RRC using the Nano App. You could try restarting your phone since that has fixed such problems before.