Ts2000+RC2000+PC on Radio Site

[video4]

I need some help. I have a TS2000 with a PC on the radio site, but from the control side I would like to control the radio with a RC2000 and also with a computer when I'm not at home, using the remote desktop with the PC connected to the radio using a Tiny interface from Rigexpert.
The audio and the keyer is easy, simply connecting in paralel the lines coming from the transceiver, but my question is how to connect the CAT. I think that on the Radio Site I must connect:

PC ---- COM1 and COM2 ---- TS2000

Is that correct? What Modes should I choose on both RRC?

Thanks from EA5WA Juan Carlos

[EA5WA]

Last weekend I was trying to control the TS2000 using a PC at Control Site with the MODE 4 without success.
I only Can control with the RC2000 Mobile Controller.
Is posible to use MODE 4 only with the TTL conection or I should use COM2 connected to the radio?
Is there anybody to help me?

[DF1NP]

Hi,

For my TS-2000 / RC-2000 equipment I am have this configuration:

Control Settings:
Radio:
Program Mode: 8 TS-2000
COM 0 Baud: 57600

Serial:
COM 1: inactive
COM 2: Mode 4
Baudrate 9600
Use USB: yes

Radio settings (remote):
Radio:
Program Mode 8 - TS-2000
COM0 Baudrate 57600 

Serial:
COM 1: inactive
COM 2: Mode 4
Bauderate 9600

Cable at control: USB from RRC to PC + TTL from RRC to RC-2000
Cable at Radio: RS-232 from RRC COM 2 to RS-232 TS-2000 + TTL from RRC to TS-2000
My cad program: ARCP-2000 or if you like: HRD

So you can use RC-2000 and CAD at the same time.

73
Willi

 
     

[EA5WA]

Hi,

For my TS-2000 / RC-2000 equipment I am have this configuration:

Control Settings:
Radio:
Program Mode: 8 TS-2000
COM 0 Baud: 57600

Serial:
COM 1: inactive
COM 2: Mode 4
Baudrate 9600
Use USB: yes

Radio settings (remote):
Radio:
Program Mode 8 - TS-2000
COM0 Baudrate 57600 

Serial:
COM 1: inactive
COM 2: Mode 4
Bauderate 9600

Cable at control: USB from RRC to PC + TTL from RRC to RC-2000
Cable at Radio: RS-232 from RRC COM 2 to RS-232 TS-2000 + TTL from RRC to TS-2000
My cad program: ARCP-2000 or if you like: HRD

So you can use RC-2000 and CAD at the same time.

73
Willi

 
     

Thanks Willi for your help. I Will try next weekend.
Another question is, is it posible to connect a PC at radio Site to COM1 in order to have CAT control when I'm at Radio Site?
Sometimes, I want to control my radio from a laptop without Remoterig, using a Remote desktop connected to that PC.
Thanks 73's from EA5WA Juan Carlos

[sm2o]

Yes it's possible if you set Radio-RRC com1 in mode 6 and connect the PC to com1 at the radio site

73 de mike

[EA5WA]

Thanks both of you. I will try on xmas holidays when I will go to the radio site

[EA5WA]

Good news...

I'm right now on the Radio Site and I have CAT control from the PC on the Radio Shack through the RRC1258. Tomorrow I'll try from the Control Site...

Many thanks to all of you

73's from Juan Carlos EA5WA

[EA5WA]

From t'he Control Site is also working as I wanted.
Thanks for your help.

73's de Juan Carlos EA5WA