Firmware upgrade issue!

[M1EMB]

Hi
Hope someone can help, I did a big upgrade to my 2 x 1258 MRK2 today and now I can't get my 7100 to connect.   I went to the latest firmware from 2.75 I belive it was, I can connect to both units but no radio.   My bootloader is 1.10.  Should I have uploaded with a lower firmware version first?   Sorry not sure what other details to give.  It did work before that I was testing it out after it being off for so long and a move of location.   

Thank you

Stuart

[M1EMB]

Help, anyone? 

[sm2o]

Hi

check the settings. if you update so many version in one update there can be new settings which have been added and need o be set correct.

73 de mike

[M1EMB]

Thank you very much for the reply, I was able to get to the bottom of the issue, I needed to reset the radio end of the RR setup (IC7100) but I am seeing this as a regular issue now, I had to reset the radio every now and again but it seems I am doing it daily now and the only way I can do it is to cut the power to the PSU and back on again.   Any ideas or settings that might stop the radio from being able to turn back on?

Thanks again
Stuart

[sm2o]

Hi Stuart

I have never heard that a IC-7100 need to be rebooted to start. I can't see any relation between that and your Remotrig firmware update

73 de mike