My remote is working fine using the RR1258 but when I try to use RT Systems to remotely program the radio, it fails.
The COM ports are configured properly and I am using COM 7 (9600 8n1). I can use either Icom's RS-BA1 or the current HRD software to manage and operate the radio.
RT-Systems (programming)
- I was able to download the configuration and frequencies from the radio using RT-Systems, which says that link is working!
- However, when I try to upload the frequencies and configurateion using RT-Systems, it fails!
Using RT-Systems, I tried to upload using the software's "normal" and "fast". (This is ths "Adjust Sending Speed: Normal or Fast")
- In "fast" the radio does not respond.
- In "normal" it responds then fails to clone the radio.
- When it fails, the radio is initialized and lost everythng. I then need to load the saved frequencies and configuration from the radio's SD-Card (good that I backed it all up to the SD Card before trying to upload).
So I am looking for suggestions from anyone who has managed to remotely program their IC-7100 using RT Systems software.
