DIGIMODES - RRC1258MkII - TS480SAT

[LA7THA]

Hey

Did you find any sulution on this one, i have done the same, i also only get a carier when i transmitt. Out0 on remote RRC is set to RTTY > to pin 8 (From ts480 usermanaul, RTK RTTY (FSK) keying input. Ground this terminal to alternate Mark and Space.) Out1 is Keyer (and it work) Out2 is set to PTT > to pin 3 (from ts480 manaual, Ground this terminal to transmit. ANI (DATA connector) terminal turns OFF)

any help please

73 Rune la7tha

[IN3ASW]

Hi,
please read here
http://www.remoterig.com/forum/index.php?PHPSESSID=6f41ii8bo6vkdnbj3ku6bvtdb7&topic=819.msg3973#msg3973

and here in the same 3D :
http://www.remoterig.com/forum/index.php?PHPSESSID=6f41ii8bo6vkdnbj3ku6bvtdb7&topic=819.msg4742#msg4742

73's

Gianni IN3ASW

[LA7THA]

Hi

I will try this, thanks for help and info.

73 Rune LA7THA

[SV1DPI]

At Radio site: Wire jumper goes from I/O PIN 6 (Radio RRC OUT1 is set to Baudot/45) to the TS480SAT Remote connector PIN 7 - RTK.
mine goes to pin8 in 480 side
see more details here
http://users.otenet.gr/~sv1dpi/en/articles/remoterig.html