Remote Rig

RRC 1258 Support in English => General discussion forum => Topic started by: DXfor.me on 2012-10-07, 16:48:59

Title: Feedback on the Controller on change of the Controlled radio
Post by: DXfor.me on 2012-10-07, 16:48:59

I wonder If I configured something bad : The remote stations display exactly What I selected on the Controller station.

But If someone change anything on the Remoted station, can't I have the feed back on the Controller ? Someone for exemple changed the Split on the "Remoted Station". For now I don't have the information on the Controller anything changed.

Is it only working One way ?

Title: Re: Feedback on the Controller on change of the Controlled radio
Post by: sm2o on 2012-10-07, 22:30:46

I have never heard about the situation you describe, but you don't say what radio you are using, If you using a PC for control etc. It's not possible to say anymore without more info.

73 de mike

Title: Re: Feedback on the Controller on change of the Controlled radio
Post by: DXfor.me on 2012-10-08, 07:38:18

My controller is a FT450
The remoted station is a FT2000

Let's say I'm working with the remoted station (FT450), any chance on he FT450 will affect the FT2000 (frequency, filters, what ever you want)

Let's say now, I go to the remoted QTH and I change something on the FT2000 (such as a frequency), the FT450 do not have the changed frequency.

I was only wondering if change on 1 TX will affect the other on the 2 ways, or only change will occurs from the Controller TO the Remoted.

Title: Re: Feedback on the Controller on change of the Controlled radio
Post by: sm2o on 2012-10-08, 08:09:19

Ok you are using Yaesu Twin, As you can see in the manual the combination FT-450--FT-2000 is not supported as we have not been able to test that combination.

73 de mike

The following combination are tested (from the manual)
Control Radio
FT-450 FT-450
FT-950 FT-950
FT-950 FT-5000
FT-2000 FT-2000
FT-2000 FT-5000
FT-5000 FT-5000
FT-5000 FT-9000
FT-9000 FT-5000
FT-9000 FT-9000

Title: Re: Feedback on the Controller on change of the Controlled radio
Post by: DXfor.me on 2012-10-08, 08:24:02

Quote from: sm2o on 2012-10-08, 08:09:19

Ok you are using Yaesu Twin, As you can see in the manual the combination FT-450--FT-2000 is not supported as we have not been able to test that combination.

73 de mike

The following combination are tested (from the manual)
Control Radio
FT-450 FT-450
FT-950 FT-950
FT-950 FT-5000
FT-2000 FT-2000
FT-2000 FT-5000
FT-5000 FT-5000
FT-5000 FT-9000
FT-9000 FT-5000
FT-9000 FT-9000

Does it means if I could have 2 FT2000, it should work on the 2 ways ?