Remote Rig

RRC 1258 Support in English => Configuration, RRC 1258 => Topic started by: n7mj on 2015-11-26, 03:28:06

Title: Setting up Kenwood TS 2000
Post by: n7mj on 2015-11-26, 03:28:06

Help! Help! Help!
Trying to setup my TS2000 and keep getting the flashing yellow light on RCC Control (SIP Connection Failed) when trying to turn on the 2000 with the RC 2000 remote head. I also hear an audio sound through the speaker that is the same sound one would get while dialing a number on the telephone and the number is no longer in working or disconnected.

Any suggestions?

Jack N7MJ

Title: Re: Setting up Kenwood TS 2000
Post by: dj0qn on 2015-11-26, 03:46:19

Jack,

Looks like your network setup is not correct. Drop me a short mail to dj0qn (at) darc.de and I will send
you my network checklist that walks you through the process.

73,
Mitch DJ0QN / K7DX

Title: Re: Setting up Kenwood TS 2000
Post by: n7mj on 2015-11-27, 05:26:33

Mitch, thanks. I got it working. You are right, it was a network setting.

Jack N7MJ