Remote Rig

RRC 1258 Support in English => Configuration, RRC 1258 => Topic started by: n7mj on 2015-12-26, 22:31:29

Title: Lenovo 100s laptop Windows 10 USB issues
Post by: n7mj on 2015-12-26, 22:31:29

Greetings and a belated Merry Christmas to all!

I received a Lenovo 100S laptop running Windows 10 for Christmas. I have downloaded Micobit Setup Manager and can connect to the "Control," only when the control is connected to the internet via the wifi module via my browser. I can not, however, connect to the Control via USB. Any suggestions? I'm guessing my new laptop is missing a USB driver that recognizes the RCC boxes.

73

Jack N7MJ

Title: Re: Lenovo 100s laptop Windows 10 USB issues
Post by: Jan (Microbit) on 2015-12-27, 10:12:19

With "cannot connect via USB", do you mean that the PC does not react at all when connecting the RRC, or do you mean that Setup Manager does not "see" it? If the PC finds it a HID(Human Interface Device) should be added in Device Manager when connecting the RRC.

Title: Re: Lenovo 100s laptop Windows 10 USB issues
Post by: VO1HP on 2016-01-11, 18:30:51

Try Setup Manager V1.27.....

Frank VO1HP

Title: Re: Lenovo 100s laptop Windows 10 USB issues
Post by: Jan (Microbit) on 2016-01-11, 19:30:37

Quote from: VO1HP on 2016-01-11, 18:30:51

Try Setup Manager V1.27.....

Frank VO1HP

I would recommend to try the new 1.30 before going that route  :)