Remote Rig
RRC 1258 Support in English => General discussion forum => Topic started by: ea5zj on 2024-09-02, 13:46:59
-
Hello everyone. I am installing 1216 via IP. I can click with relays and everything is perfect.
But I can't get it to change automatically.
The question is......what does this mean about Kenwood?
Which one should I choose if I have ts2000?
I have tried all the combinations and it is not possible for me.
My Control says switch off or not connected.
I have matched ports on remote antenna and ccr control.
In control you only have to match the port with the same one on the switch and nothing else. What did I forget?
It took hours but I don't see the error. Thank you.
-
Kenwood (IF) is what you normally use if you want the AS-1289 to ask for the frequency from the radio.
remeber that you need to have a CAT cable from the Radio-RRC com2 to the Radio CAT port
com 2 should be set to mode 4 and that all three set to the same baudrate
73 de mike
-
Thanks for the quick response.
I don't understand either.
My rs232 of the ts2000 is occupied by CCR in the tower.
Control at home, not used with 2.
I use USB for both the transmitter and the rotor, and it works.
I also use rc2000 and it's always perfect.
I understood remoterig via ip tells the switch where to go.
Isn't that so?
Excuse my ignorance. Google translations are not very good.
Photo my control in house. Is a Antenna Switch 1269
-
i don't know what you mean by
"My rs232 of the ts2000 is occupied by CCR in the tower."
if you mean that you allready have connected the Radio-RRC to the Radio-CAT port all is OK
The AS-1289 talks to the Radio via the CAT cable, the RRC does not know anything about the radio, it only transfer data
but if you already us com 2 for controlling the radio all is OK as the AS-1289 can share the connection with the control software.
So if you set Radio-RRC settings with the correct ip nummer (radio-RRC) and correct port(13010) and serial setting to 9600 it should work and on the main page you should see the "Current frequency" following the radio
73 de mike
-
working now.
thanks!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
ea5zj