Show Posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.


Messages - bbuff98

Pages: [1] 2
1
General discussion / Request
« on: 2012-12-16, 03:56:04 »
Gentlemen:

I have been asked by 3 amateur clubs in my area to do a presentation on the RRC client working with my Kenwood 590S and K8ZEC's TS2000 at their respective club meetings in January and February.  I am wondering if you could send me any system drawings to imbed in a Windows PowerPoint to help how your system operates as well as a practical demonstration of the ARCP 590S and ARCP 2000 software via the RRC Client?  If you have a specific direction you would like my presentations to be presented, I would be happy to follow your lead.     By the way, i was able to get the RRC client software to work with both radios at my QTH.

Secondly, K8ZEC's dongle sound card has quit working.  I am going to test it on my setup to be sure this is not a setup problem with his system and will notify you if and when i have to return the dongle for repair.

Respectfully,
Jerry Schumann
KA8D

2
General discussion / Re: RRC client 1.6.0
« on: 2012-11-21, 19:41:07 »
1.6.1 works perfectly

thanks
bbuff98

3
General discussion / Re: TS-2000 with RRC-Client 1.6.0.0
« on: 2012-11-21, 19:39:07 »
Roland, 1.6.1 works perfectly

73 de KA8D

4
General discussion / Re: RRC client 1.6.0
« on: 2012-11-17, 18:28:55 »
Roland, if you email me at satengineer@comcast.net, I will provide you with all of the info you require to login to my TS2000

73 de KA8D

5
General discussion / RRC client 1.6.0
« on: 2012-11-16, 04:22:33 »
Gentlemen:

I loaded 1.6.0 onto my laptop and connected over the internet to K8ZEC's Kenwood TS2000.  When I attempted to to connect with the ARCP2000 software, the connect button went on momentarily and then went off.  I tried multiple com ports and still no joy.  The radio is set to 57600 port speed as I checked with K8ZEC today.  any suggestions?

6
General discussion / Re: RRC Micro
« on: 2012-10-24, 23:48:35 »
Thanks Mike, you are one great company.  I have recommended RRC to every Ham I know.

73 de Jerry

7
General discussion / Re: Kenwood TS2000
« on: 2012-10-24, 20:27:13 »
Roland, I sent the RRC Micro dongle back to MicroBit and will try to load 1.5.5 when I get the dongle back.  If it still fails, I will turn on debug and then send you the file.  Sorry for not responding sooner.

Jerry S
KA8D
73

8
General discussion / Re: RRC Micro
« on: 2012-10-24, 20:19:39 »
Mike, how about this:  you could send me a new sound card and then bill me after ten days if you do not receive the bad dongle from me.  Or, you could send me a new one now and bill me immediately and then refund PayPal when you receive my bad sound card.  Please let me know if any of this is possible.

Respectfully,
Jerry Schumann
KA8D
73

9
General discussion / Re: RRC Micro
« on: 2012-10-20, 05:21:02 »
Mike, i sent the dongle back today.  Please let me know when you receive it.

Jerry S
KA8D

10
General discussion / Re: Kenwood TS2000
« on: 2012-10-12, 15:16:59 »
Good Morning:

The issue I am having with 1.5.5 is I can not seem to connect to the RRC software from the ARCP2000 program.  Because I am having a sound card issue at the present time, I unloaded all of the RRC Micro software and started with 1.5.5 and I still have the issue connecting the ARCP program to the RRC Micro software.  The connect button lights up momentarily and then goes dark.  I move back to the 1.5.2 software and it works flawlessly.

KA8D

11
General discussion / Re: RRC Micro
« on: 2012-10-12, 15:08:42 »
Good Morning Mike:

The internal PC sound card works flawlessly and the RRC Micro sound card does not.  It works great on transmit but not receive.  Would you prefer I open up the unit to check for "whiskers" on the RRC sound card prior to sending the unit back in to you folks?

Jerry S
KA8D

12
General discussion / Re: RRC Micro
« on: 2012-10-12, 09:13:26 »
Good Morning Mike:

The headset(s) work with the internal sound cards just not with the dongle.

Jerry S

13
General discussion / Re: RRC Micro
« on: 2012-10-12, 06:08:31 »
PS:  I have tried the dongle on two XP machines and 1 Win7 machine with the same results

KA8D

14
General discussion / RRC Micro
« on: 2012-10-12, 06:04:52 »
I received my 1258/Dongle a week ago and everything was working normal until yesterday.  I have my dongle (RRC Micro) set up to work with my 1258 on a Kenwood TS2000 and on a Kenwood TS2000 that K8ZEC (John) owns.  Yesterday, the audio began to get distorted and today, on multiple headsets, it is distorted regardless of which rig I activate.  How do I return the dongle for repair/replacement?

Respectfully,
Jerry Schumann
KA8D

15
General discussion / Re: Kenwood TS2000
« on: 2012-09-28, 07:03:16 »
 :)  Mike, I wish to thank you for your help.  The only remaining issue is I can not key the remoted transmitter from the dongle from my laptop.  I can key the transmitter with the dongle from both of my desktop pc's; however, they are running WinXP and Vista, the laptop uses windows 7 64 bit.  One last issue, i have tried to get version 1.5.5 to work and can not but am very satisfied with 1.5.2.

thanks very much,
Jerry S
KA8D

Pages: [1] 2