1
Configuration, RRC 1258 / Re: TS-590 Twin I/O Settings
« on: 2017-04-25, 23:00:42 »
TNX a lot Willi
73 Robert
73 Robert
Show Posts
This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.
Pages: [1]
2
Configuration, RRC 1258 / TS-590 Twin I/O Settings
« on: 2017-04-21, 18:19:08 »
Hello,
Can someone share the I/O settings on Control and Radio RRC for TS-590 Twin to be able to connect radios, keyer, ... Having some troubles with it
73 Robert, S57AW
Can someone share the I/O settings on Control and Radio RRC for TS-590 Twin to be able to connect radios, keyer, ... Having some troubles with it
73 Robert, S57AW
3
General discussion forum / FS: RC-480 KIT + RRC-1258MkIIs Control Unit
« on: 2014-12-07, 19:21:04 »
Hello,
I have new Kenwood RC-480 KIT and new RRC-1258MkIIs Control Unit for sale. Both purchased this year, tested but never used after that.
RC-480 KIT is an extra Control Head for Kenwood TS-480 (Head Only) which includes the face plate (the control head), mount and hardware.
More info:
http://www.difona.de/details.php?&language=en&ID=1&artmatch=kwrc480
Great option for multi-acces to radio RRC with extra RC-480 and control RRC or as a spare replacement head for TS-480.
Will ship worldwide.
Contact me for more info if you are interested: rbajuk@gmail.com
73 Robert, S57AW
Modify message
I have new Kenwood RC-480 KIT and new RRC-1258MkIIs Control Unit for sale. Both purchased this year, tested but never used after that.
RC-480 KIT is an extra Control Head for Kenwood TS-480 (Head Only) which includes the face plate (the control head), mount and hardware.
More info:
http://www.difona.de/details.php?&language=en&ID=1&artmatch=kwrc480
Great option for multi-acces to radio RRC with extra RC-480 and control RRC or as a spare replacement head for TS-480.
Will ship worldwide.
Contact me for more info if you are interested: rbajuk@gmail.com
73 Robert, S57AW
Modify message
4
General discussion forum / Re: FS: RC-480 KIT (Control head for TS-480)
« on: 2013-12-03, 10:19:26 »
SOLD SOLD SOLD
5
General discussion forum / TS-480 fixed audio out
« on: 2013-11-02, 10:24:21 »
Hi,
I just wonder where are guys taking "audio out" from control RRC to PC soundcard input using TS-480. I know it can be taken from SP jack or TTL on control RRC or speaker jack from TS-480 head but I just wonder if there is a "fixed level audio out" option.
Are all those audio outputs volume knob depended or is there a way to take fixed audio output from TS-480 - maybe ANO on pin 5 on TS480 data connector.
What is the recommended setup for data receiving part ?
73 Robert, S57AW
I just wonder where are guys taking "audio out" from control RRC to PC soundcard input using TS-480. I know it can be taken from SP jack or TTL on control RRC or speaker jack from TS-480 head but I just wonder if there is a "fixed level audio out" option.
Are all those audio outputs volume knob depended or is there a way to take fixed audio output from TS-480 - maybe ANO on pin 5 on TS480 data connector.
What is the recommended setup for data receiving part ?
73 Robert, S57AW
6
General discussion forum / FS: RC-480 KIT (Control head for TS-480)
« on: 2013-10-21, 13:31:50 »
Hello,
I have nearly new Kenwood RC-480 KIT for sale.
RC-480 KIT is an extra Control Head for TS-480 (Head Only) which includes the face plate (the control head), mount and hardware.
More info:
http://www.difona.de/details.php?&language=en&ID=1&artmatch=kwrc480
Great option for multi-acces to radio RRC or as a spare replacement head for TS-480.
200 EUR shipped to EU, can ship worldwide if you pay shipping.
More info: rbajuk@gmail.com
73 Robert, S57AW
I have nearly new Kenwood RC-480 KIT for sale.
RC-480 KIT is an extra Control Head for TS-480 (Head Only) which includes the face plate (the control head), mount and hardware.
More info:
http://www.difona.de/details.php?&language=en&ID=1&artmatch=kwrc480
Great option for multi-acces to radio RRC or as a spare replacement head for TS-480.
200 EUR shipped to EU, can ship worldwide if you pay shipping.
More info: rbajuk@gmail.com
73 Robert, S57AW
7
Configuration, RRC 1258 / Re: TS-480 delay when switching ON ... SOLVED!!!
« on: 2013-06-16, 21:35:07 »
Problems solved and nothing is wrong with Edimax or Linksys router or RRC but with operator:-) It is all my mistake / error.
JMP2 on radio RRC was set wrong to 0 instead of 1. Grrr...
Everything works nice now and I am sorry for the bandwidth.
TNX & 73 Robert
JMP2 on radio RRC was set wrong to 0 instead of 1. Grrr...
Everything works nice now and I am sorry for the bandwidth.
TNX & 73 Robert
8
Configuration, RRC 1258 / TS-480 delay when switching ON ... SOLVED!!!
« on: 2013-06-14, 22:07:10 »
I am preparing remote station using TS480 and pair of Remoterig boxes. I have tested everything in my home LAN first, than on remote side. Everything works great in LAN and WAN, no issues once I FWD ports and when I get radio switced ON.
I am having same issue when I hooked all together in my LAN at home or via WAN on remote location, setup was like this:
- both RRC updated to firmware 2.72
- remoterig strips wired to "new model" of TS480
- both RRC accesible from browser and I did basic setup for TS480
- radio and control head are connected to RRCs with 6 pin data cable, no other connections at this time
- port FWD OK (13000,13001,13002...), RTS Status excellent (60), UDP cmd status OK (40)
My problem is that when I press "on" switch on ts480 head in LAN or via Internet red led light on radio turns on and I hear relay on the radio, RRC status goes to radio "ON" but control head of TS480 does not turns on. I need to press and hold "ON" button on TS480 again after about 20s to get radio head alive and after that works OK. Switching off radio via Remoterig works OK, but I need to press ON button twice again in about 30sec to get radio (TS480 head) on again.
If i connect head directly to radio without remoterig rig ON and OFF works normal.
Is that latency when switching on normal on Remoterig or should I look at some other setup parameters in RRC or radio.
73 Robert, S57AW
I am having same issue when I hooked all together in my LAN at home or via WAN on remote location, setup was like this:
- both RRC updated to firmware 2.72
- remoterig strips wired to "new model" of TS480
- both RRC accesible from browser and I did basic setup for TS480
- radio and control head are connected to RRCs with 6 pin data cable, no other connections at this time
- port FWD OK (13000,13001,13002...), RTS Status excellent (60), UDP cmd status OK (40)
My problem is that when I press "on" switch on ts480 head in LAN or via Internet red led light on radio turns on and I hear relay on the radio, RRC status goes to radio "ON" but control head of TS480 does not turns on. I need to press and hold "ON" button on TS480 again after about 20s to get radio head alive and after that works OK. Switching off radio via Remoterig works OK, but I need to press ON button twice again in about 30sec to get radio (TS480 head) on again.
If i connect head directly to radio without remoterig rig ON and OFF works normal.
Is that latency when switching on normal on Remoterig or should I look at some other setup parameters in RRC or radio.
73 Robert, S57AW
9
General discussion forum / Re: RRC with 3G private IP - any solution?
« on: 2013-02-05, 15:56:48 »
I understand that VPN tunnel might be a solution... but VPN tunnel connects two PCs or 2 routers and using RRC pair I have to connect 2 LANs in order to establish RRC Control - RRC Radio connection (RRCs are usually connected to the router on both sides). I might be wrong as I am not the IT / network expert
73 Robert
73 Robert
crazy
Then a VPN tunnel initiated from the 3G/4G side is probably the only solution
/mike
10
General discussion forum / Re: RRC with 3G private IP - any solution?
« on: 2013-02-05, 15:49:44 »
Hi Mike,
Unfortunately all prepaid 3G/4G internet networks in S5 have internal - private IP .. They are offering business contracts (private APN) but this comes quite expensive (at least 3 SIM cards + fees for incoming traffic)
73 Robert
P.S.: Mike, please move the topics to RRC 12558 English (it belongs more to general topic there and not under Webswitch 1216H)
Unfortunately all prepaid 3G/4G internet networks in S5 have internal - private IP .. They are offering business contracts (private APN) but this comes quite expensive (at least 3 SIM cards + fees for incoming traffic)
73 Robert
P.S.: Mike, please move the topics to RRC 12558 English (it belongs more to general topic there and not under Webswitch 1216H)
11
General discussion forum / RRC with 3G private IP - any solution?
« on: 2013-02-05, 14:29:47 »
Hi
I know there were discussions before... Is there a way to use RRC if using 3G internet on the radio side - all ports are blocked by ISP (behind NAT), so no public IP address and direct connection is not possible.
Any VPN, virtual HUB or similar workaround ...?
73 Robert, S57AW
I know there were discussions before... Is there a way to use RRC if using 3G internet on the radio side - all ports are blocked by ISP (behind NAT), so no public IP address and direct connection is not possible.
Any VPN, virtual HUB or similar workaround ...?
73 Robert, S57AW
13
General discussion forum / TS-480 straps and jumper settings
« on: 2013-02-02, 14:02:02 »
Hi,
I am trying to get my remote station up for the first time :-)
Now I am setting straps and jumper for TS-480 (new version) in the control RRC:
- 4 straps according to the manual (Configuration type 1)
- JMP1 (open, dynamic mic)
- JMP2 (closed - 9v)
- JMP3 (closed)
- JMP4 (not present in ver. 7)
- JMP5 ?? - should be opened or closed for TS-480?
Is that OK?
73 Robert, S57AW
I am trying to get my remote station up for the first time :-)
Now I am setting straps and jumper for TS-480 (new version) in the control RRC:
- 4 straps according to the manual (Configuration type 1)
- JMP1 (open, dynamic mic)
- JMP2 (closed - 9v)
- JMP3 (closed)
- JMP4 (not present in ver. 7)
- JMP5 ?? - should be opened or closed for TS-480?
Is that OK?
73 Robert, S57AW
Pages: [1]