Messages

1

Configuration, RRC 1258 / Re: RRC1258 seems to be dead after Firmware upload PLEASE HELP

« on: 2013-11-29, 04:53:02 »

it is not the cable.

the usb socket is definatly damaged. I see only 3 pins. I think it is mechanical damaged. Maybe it is happende because of a bad plug.....

now everything is working excapt the usb socket. maybe I will change it later ...

2

Configuration, RRC 1258 / RRC1258 seems to be dead after Firmware upload PLEASE HELP

« on: 2013-11-13, 05:44:05 »

Hello Everyone,

I have a new RemoteRig since today. The TRX Side is ready for use (I hope:-)) but I have a BIG problem with the Controll RRC.

First everything works. Then I set a PW for the HTTP acces, after that I cant log in anymore. Maybee I wrote down a wrong username or maybee type 2 time the same wrong passwort, I am not sure what happen.... strange!!

Ok, first I tried to flash the firmware. Of course no sucsess. Then I read I can reset the device with push the bottun 30seconds. I did that.

NOW the problem is, I cant connect anymore with the Web interface or via USB with the software to the device. The PWR
It seems like the Device software is not ok?

I see that maybee the miniUSB connector is broken? I see there only 3pins and I am note sure but it looks like the 4.one is broken and in the back...

Can it be that the device is flashed only a half? Is there a Way to flash the Device via COM1?
If not I have to change the USB plug maybee? I want to use my trx in th evening

many thanks dirk do1hdr
Modify message

I configurated my router now to default 192.168.0.1 and I can go to the RRC via LAN now! That means fireware updatet is ok but I think the mini USB Port is broken?