Show Posts
1
Configuration, RRC 1258 / SSB TX issue on icom 706
« on: 2017-04-20, 11:38:57 »
Hello everyone
I've been setting up a remoterig an Icom 706 as explained in your website.
I made the relevant tests of cables and running through the local area network (LAN). The result has been satisfactory.
The problem is that from the remote location through the Internet does not work on the transmission SSB, FM transmission but does a proper audio.
The reception is correct at all times, latency is not appreciated.
The remote radio acts on an external tuner and It works perfectly.
I've tried various configurations of equipment, different sound qualities and have tried to increase the values of jitter.
The router has been configured for each assigned ports and so I tested the DMZ option with the same results.
I also tried to locate the head to another internet connection, and the result is identical.
Connection where the radio is working through a wimax link (3Mb / s symmetric), and the head is 200km in an installation of fiber optics (1000dwn / 200up Mb / s).
What can I do?
I add the configuration export html page:
___________________________________
Info
Name Value
Company Microbit
Product 1258
PID 4
Version 7
HW 8
Software 2.90
Bootloader 1.10
Compiler 4.6.2
Build Feb 17 2016 10:16:14
ROM/RAM 481192/44080
ETH-RAM 2944 (max 3kB)
USB-RAM 15352 (max 16kB)
Battery-RAM 4
ResetSrc 0 [3]
Last WD Reset 1177952693
Uptime 0 Days, 0 Hours, 7 Mins, 20 Secs
Serial number *****
MAC address 00:*:*:*:*:*
IP address 192.168.2.100
Netmask 255.255.255.0
Gateway 192.168.2.1
DNS 8.8.8.8
Wi-Fi network module not present
Settings
Unit ID (Banner) EB3AM
DHCP 0
IP 192.168.2.100
Netmask 255.255.255.0
Gateway 192.168.2.1
Dns server 8.8.8.8
Eth-type 5
IP-interface 0
Web page user ****
Web page pwd ****
Web page user(saving) ****
Web page pwd(saving) ****
Program mode 2
Control panel 0
Sip password ****
Sip contact(Radio RRC IP/hostname)
Auto connect 0
Audio quality 0
Audio dual-rx 0
Audio left/right ch swap 0
Codec out gain 255
Codec inp gain 0
Codec inp HPF Hz 3
Codec inp preamp 1
Codec inp attenuation 0
COM0 baudrate 19200
COM0 data bits 8
COM0 stop bits 1
COM0 parity 0
COM0 Program mode 3 char timeout 2
Use USB Com Port as COM0 0
COM1 mode 0
COM1 baudrate 9600
COM1 data bits 8
COM1 stop bits 1
COM1 parity 0
COM1 rts/cts 0
COM1 terminator (hex) 00
Use USB Com Port as COM1 0
COM2 mode 0
COM2 baudrate 9600
COM2 data bits 8
COM2 stop bits 1
COM2 parity 0
COM2 terminator (hex) 00
Use USB Com Port as COM2 0
COM3(Extra) mode (USB-COMFSK) 10
UDP cmd port 13002
UDP audio port 13001
SIP port 13000
Web server port 80
Telnet server port 23
Rx jitter buffer size 4
Rx jitter delay 3
Audio packet size (ms) 20
RTP tx mode 0
Disable audio tones 0
Audio tones -db [70-0] 30
IP identification (morse) 0
Full duplex 0
PTT-off mute delay 0
IP Type-of-Service (dec) 0
Yaesu power-on/off 0
UDP antenna-switch port 13010
UDP cmd min-data-size 0
Use common network settings 0
Check interval 0
DDNS Host name 0
Own host name
Username
Password
Enable 0
Speed wpm [0/10-40] 0
Iambic 1
Paddle reverse 0
Weight [25-40] 30
Side tone hz [0,300-1500] 800
Side tone -db [50-0] 20
Lf delay ms [0-500] 0
Key delay ms [0-250] 50
PTT activated by Keyer 0
PTT tail delay ms [0-999] 0
Speed pot min wpm [5-99] 10
Speed pot max wpm [5-99] 40
IN0 mode 0
OUT0 mode 0
OUT0 mode 0
OUT1 mode 0
OUT1 mode 0
OUT2 mode 1
OUT2 mode 1
USB RTS as PTT 0
USB DTR as CW 0
Enable ping watchdog 0
IP address to ping 192.168.2.1
Ping interval (seconds) 300
Startup delay (seconds) 300
Failure count to reboot 3
1: Name (SSID)
1: Password (PSK)
2: Name (SSID)
2: Password (PSK)
3: Name (SSID)
3: Password (PSK)
4: Name (SSID)
4: Password (PSK)
5: Name (SSID)
5: Password (PSK)
6: Name (SSID)
6: Password (PSK)
7: Name (SSID)
7: Password (PSK)
8: Name (SSID)
8: Password (PSK)
Status
Name Value
P5.2 ON
Connection status OK
SIP status Connected/transfering
Last SIP error None
RTP status Excellent(60)
UDP cmd status OK(28)
SIP command timeout 0
Rx Jitter buffer size 4
Rx Jitter delay 3
Dual Rx 0
Current audio packet size 20
Current audio quality 0 - alaw 8 kHz
External IP 87.*.*.*
SIP Out port 13000
SIP In port 13000
Audio Out port 43010
Audio In port 13001
Command Out port 25532
Command In port 13002
External SIP In port 13000
External Audio In port 13001
External Cmd In port 13002
Other party 91.*.*.*
Other party(mac) 00:*:*:*:*:*
Input 1 High
Input 2 High
Output 0 Low
Output 1 Low
Output 2 Low
Dynamic DNS status Unknown
Ping status (watchdog) Off
DNS status OK, remoterig.com = 213.180.92.125
Active profile Default
PTT status OFF
Antenna-Switch (IP) not connected
Common network settings No
System messages No
___________________________
73 and thanks!
EB3AM, Jordi from Catalonia.
I've been setting up a remoterig an Icom 706 as explained in your website.
I made the relevant tests of cables and running through the local area network (LAN). The result has been satisfactory.
The problem is that from the remote location through the Internet does not work on the transmission SSB, FM transmission but does a proper audio.
The reception is correct at all times, latency is not appreciated.
The remote radio acts on an external tuner and It works perfectly.
I've tried various configurations of equipment, different sound qualities and have tried to increase the values of jitter.
The router has been configured for each assigned ports and so I tested the DMZ option with the same results.
I also tried to locate the head to another internet connection, and the result is identical.
Connection where the radio is working through a wimax link (3Mb / s symmetric), and the head is 200km in an installation of fiber optics (1000dwn / 200up Mb / s).
What can I do?
I add the configuration export html page:
___________________________________
Info
Name Value
Company Microbit
Product 1258
PID 4
Version 7
HW 8
Software 2.90
Bootloader 1.10
Compiler 4.6.2
Build Feb 17 2016 10:16:14
ROM/RAM 481192/44080
ETH-RAM 2944 (max 3kB)
USB-RAM 15352 (max 16kB)
Battery-RAM 4
ResetSrc 0 [3]
Last WD Reset 1177952693
Uptime 0 Days, 0 Hours, 7 Mins, 20 Secs
Serial number *****
MAC address 00:*:*:*:*:*
IP address 192.168.2.100
Netmask 255.255.255.0
Gateway 192.168.2.1
DNS 8.8.8.8
Wi-Fi network module not present
Settings
Unit ID (Banner) EB3AM
DHCP 0
IP 192.168.2.100
Netmask 255.255.255.0
Gateway 192.168.2.1
Dns server 8.8.8.8
Eth-type 5
IP-interface 0
Web page user ****
Web page pwd ****
Web page user(saving) ****
Web page pwd(saving) ****
Program mode 2
Control panel 0
Sip password ****
Sip contact(Radio RRC IP/hostname)
Auto connect 0
Audio quality 0
Audio dual-rx 0
Audio left/right ch swap 0
Codec out gain 255
Codec inp gain 0
Codec inp HPF Hz 3
Codec inp preamp 1
Codec inp attenuation 0
COM0 baudrate 19200
COM0 data bits 8
COM0 stop bits 1
COM0 parity 0
COM0 Program mode 3 char timeout 2
Use USB Com Port as COM0 0
COM1 mode 0
COM1 baudrate 9600
COM1 data bits 8
COM1 stop bits 1
COM1 parity 0
COM1 rts/cts 0
COM1 terminator (hex) 00
Use USB Com Port as COM1 0
COM2 mode 0
COM2 baudrate 9600
COM2 data bits 8
COM2 stop bits 1
COM2 parity 0
COM2 terminator (hex) 00
Use USB Com Port as COM2 0
COM3(Extra) mode (USB-COMFSK) 10
UDP cmd port 13002
UDP audio port 13001
SIP port 13000
Web server port 80
Telnet server port 23
Rx jitter buffer size 4
Rx jitter delay 3
Audio packet size (ms) 20
RTP tx mode 0
Disable audio tones 0
Audio tones -db [70-0] 30
IP identification (morse) 0
Full duplex 0
PTT-off mute delay 0
IP Type-of-Service (dec) 0
Yaesu power-on/off 0
UDP antenna-switch port 13010
UDP cmd min-data-size 0
Use common network settings 0
Check interval 0
DDNS Host name 0
Own host name
Username
Password
Enable 0
Speed wpm [0/10-40] 0
Iambic 1
Paddle reverse 0
Weight [25-40] 30
Side tone hz [0,300-1500] 800
Side tone -db [50-0] 20
Lf delay ms [0-500] 0
Key delay ms [0-250] 50
PTT activated by Keyer 0
PTT tail delay ms [0-999] 0
Speed pot min wpm [5-99] 10
Speed pot max wpm [5-99] 40
IN0 mode 0
OUT0 mode 0
OUT0 mode 0
OUT1 mode 0
OUT1 mode 0
OUT2 mode 1
OUT2 mode 1
USB RTS as PTT 0
USB DTR as CW 0
Enable ping watchdog 0
IP address to ping 192.168.2.1
Ping interval (seconds) 300
Startup delay (seconds) 300
Failure count to reboot 3
1: Name (SSID)
1: Password (PSK)
2: Name (SSID)
2: Password (PSK)
3: Name (SSID)
3: Password (PSK)
4: Name (SSID)
4: Password (PSK)
5: Name (SSID)
5: Password (PSK)
6: Name (SSID)
6: Password (PSK)
7: Name (SSID)
7: Password (PSK)
8: Name (SSID)
8: Password (PSK)
Status
Name Value
P5.2 ON
Connection status OK
SIP status Connected/transfering
Last SIP error None
RTP status Excellent(60)
UDP cmd status OK(28)
SIP command timeout 0
Rx Jitter buffer size 4
Rx Jitter delay 3
Dual Rx 0
Current audio packet size 20
Current audio quality 0 - alaw 8 kHz
External IP 87.*.*.*
SIP Out port 13000
SIP In port 13000
Audio Out port 43010
Audio In port 13001
Command Out port 25532
Command In port 13002
External SIP In port 13000
External Audio In port 13001
External Cmd In port 13002
Other party 91.*.*.*
Other party(mac) 00:*:*:*:*:*
Input 1 High
Input 2 High
Output 0 Low
Output 1 Low
Output 2 Low
Dynamic DNS status Unknown
Ping status (watchdog) Off
DNS status OK, remoterig.com = 213.180.92.125
Active profile Default
PTT status OFF
Antenna-Switch (IP) not connected
Common network settings No
System messages No
___________________________
73 and thanks!
EB3AM, Jordi from Catalonia.