Show Posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.


Messages - partytyme

Pages: [1] 2
1
General / Re: RRC Kenwood Nano "license expired"
« on: 2018-12-20, 03:25:03 »
same deal here got a new phone and would like to get it working...but

2
General / Re: nano and galaxy s7 not working
« on: 2018-12-18, 13:40:58 »
 cool i just got a s9+

3
General / reset trail please
« on: 2018-12-18, 13:37:48 »
i have a galaxy 9 now i could not get the app to work on a galaxy 7 can you please reset my trial so i can see if it will work on my galaxy9+ please  73 n8obu

4
General / Re: RRC nano kenwood & android 7.0 is not working?
« on: 2018-07-04, 22:19:04 »
 still no help with this app i see

5
General discussion forum / Re: I fixed my latency problem!!!
« on: 2018-03-07, 22:40:39 »
every wifi extender cuts the speed in half  or so i have been told by the geeks lol

6
General discussion forum / choppy tx audio
« on: 2018-03-05, 00:40:41 »
i have  an remote rig setup with two control heads  using a kenwood ts2000 they both work great when in the house  one is wired and one has a wifi card in it for portable use  i ordered a franklin wifi hot spot on sprint network after testing it using my galaxy s7's hot spot on sprint  it worked great on the phone but now that i switched over to the franklin hot spot  i am told it sounds like i have a cards stuck in a bike spokes choppy on tx only  i did a speed test on the franklin hot spot and it came back 29 ms ping 6 mg up 3 mg down my phone would not even  do 2mg down  and .5 up
i ordered the hot spot because i could get it cheaper than leaving the hot spot on my phone on they wanted 50.00 for 5 gig on my phone ..i found a way to get the franklin hot spot for 20.00 a month unlimited this is why i switched,,  any tricks i should try?
 

7
when we setup my kenwood i studied the mic wiring and we found kenwood mics are wired a few different ways  you can add extra jumpers in and make the remoterig work with many of them at the same time

8
General / Re: RRC nano kenwood & android 7.0 is not working?
« on: 2018-02-17, 13:23:52 »
 no responses  ?

9
General / Re: nano and galaxy s7 not working
« on: 2018-02-17, 13:21:52 »
i guess the issues with the galaxy and this app will never be addressed sad  :'( 

10
ok i configured them the same and both work well , i was just not sure if their was any changes that needed to be made now if i only had a good cell company in my area spring 3g sucks

11
 have my  kenwood st2000 working great and i can run it mobile using my sprint phone's hot spot  when driving  now i want to be lazy and build a 2nd control  for home use  i have a rc-2000  head and a tm-d700 head and they both work i swapped them to test them so any tricks to having them both connect up? i know i can only use one at a time . i figure i will have to turn the power off to the unit not in use  thanks for your input before i order the 2nd control box     mike n8obu

12
Configuration, RRC 1258 / Re: TS2000 - RC2000 doesn´t start
« on: 2018-02-03, 21:58:32 »
 if it works plugged right in it to the ts2000 it self  i would reseat the  jumpers i had to make up a new jumper from the control heat to the  box i learned not to over crimp the jacks you end up pushing the pins so far down they don't make a good connections  and my display would dim out until i wiggled the plugs then come back

13
yes i found it was not storing my changes  when switching from the ts2000 to the ts480 both now work   just not sure what rig i like better lol some times the changes did not store on restarts

14
 today i swapped from a ts2000 to a ts480  all went well but.. if i turn off the ts480  it turns off then turns it self back on lol if you set the auto power off in the radio it turns off as requested i am sure i missed something simple.   

15
yes still works with ts2000 just cant get the ts480 to work i see i am not the first person asking this  but they are still looking to get it working 

Pages: [1] 2